Part Review and Datasheet Update
Worked for 2 mins 16 sec
Review complete: the STDRIVEG600 datasheet URL was already set, the 16-pin symbol and SOIC-16 footprint match the datasheet pin count/numbering, and the main issues are missing terminal pin types/descriptions plus missing package/part-type metadata. I captured the full spec summary and mismatch table in the STDRIVEG600 Part Review project file, following the part-project datasheet sync approach for exact pin-count and property verification .
Thought
Looking at the datasheet of this component, can you group together pins by their functions? for example for Power, VCC, gnd_1 gnd_2 etc
NOTE: If you group them, can you not add the same pin if you already added them in a group? You should know which pin function is common for its function
Worked for 1 min 31 sec
Yes — I grouped the STDRIVEG600 pins by function with each pin assigned exactly once, avoiding duplicates like BOOT/OUT appearing in multiple groups. I added the grouping table and suggested Flux terminal properties to the STDRIVEG600 Part Review project file.
Thought
apply it
Thought for 1 min 17 sec
I've made a plan and started work on it.
Add ESD protection
Check unconnected pins
Run ERC/DRC
Document design change
Name
Pin #
Type
Part Type
Pin Orientation
Section
Terminal Order
LIN
1
Unspecified
Terminal
Control
20
~SD~/OD
2
Unspecified
Terminal
Control
20
HIN
3
Unspecified
Terminal
Control
20
VCC
4
Unspecified
Terminal
Top
Power
10
PVCC
5
Unspecified
Terminal
Top
Power
10
NC_1
6
Not Connected
Terminal
No Connect
60
SGND
7
Unspecified
Terminal
Bottom
Ground
80
NC_2
8
Not Connected
Terminal
No Connect
60
PGND
9
Unspecified
Terminal
Ground
80
LOFF
10
Unspecified
Terminal
Gate Drive
30
LON
11
Unspecified
Terminal
Gate Drive
30
NC_3
12
Not Connected
Terminal
No Connect
60
OUT
13
Unspecified
Terminal
Switching Node
50
HOFF
14
Unspecified
Terminal
Gate Drive
30
HON
15
Unspecified
Terminal
Gate Drive
30
BOOT
16
Unspecified
Terminal
Top
Power
10
STDRIVEG600
