Pin Function Grouping

flux

I’ll inspect the connector’s terminals, group them by function, and keep each pin’s Section aligned with its Pin Group.

flux

Grouped all 13 pins by function:
  • Power: VCC
  • SPI: CS, DI, SCK, DO
  • Card Detect: CD, CD2
  • Ground: GND pins and SHIELD
  • Other: NC, RSV
Each pin’s Section matches its Pin Group, with consistent orientation and ordering.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

Updated the terminal groups:
  • Power: Order 1, Top
  • SPI: Order 3, Left
  • Card Detect: Order 5, Right
  • Other: Order 7, Left
  • Ground: Order 10, Bottom
The remaining groups alternate between Left and Right since three groups cannot each have a unique orientation using only two allowed sides.
Verify symbol and footprint
Verify symbol layout
Confirm pin functions
Review footprint geometry
Sign up to send

Files

Pins

Symbol

Layout

3D View

NC
VCC
CD
CS
GND
DO
SCK
GND
DI
CD2
SHIELD
GND
RSV
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Terminal Type
NC
1
Unspecified
Other
Other
Left
7
bidi
CS
2
Unspecified
SPI
SPI
Left
3
bidi
DI
3
Unspecified
SPI
SPI
Left
3
bidi
VCC
4
Unspecified
Power
Power
Top
1
powerIn
SCK
5
Unspecified
SPI
SPI
Left
3
INPUT
GND
6
Unspecified
Ground
Ground
Bottom
10
passive
DO
7
Unspecified
SPI
SPI
Left
3
bidi
RSV
8
Unspecified
Other
Other
Left
7
bidi
SHIELD
9
Unspecified
Ground
Ground
Bottom
10
INPUT
GND
G1
Unspecified
Ground
Ground
Bottom
10
passive
CD
G2
Unspecified
Card Detect
Card Detect
Right
5
passive
CD2
G3
Unspecified
Card Detect
Card Detect
Right
5
passive
GND
G4
Unspecified
Ground
Ground
Bottom
10
passive

ST-TF-003A