Part Data Review and Validation

Thought for 1 min 23 sec

I reviewed the part project against the available data and the datasheet-sync criteria. The project already has a Datasheet URL, so no web lookup was needed. For part-project verification, the main checks are: exact pin count match, exact pin-number match, datasheet as source of truth, and flagging any missing or ambiguous pin metadata

Summary

Table

Category	Status	Notes
MPN	OK	Project has SM712-02HTG; datasheet result matches exactly.
Manufacturer	OK	Project has Littelfuse; datasheet result matches.
Datasheet URL	OK	Already present, so no update was required.
Package	Mostly OK	Project says SOT-23; datasheet says SOT23-3 / JEDEC TO-236. Functionally consistent, but project metadata is less specific.
Pin count	OK	Datasheet says 3 pins; schematic has 3 terminal elements and layout has 3 pads.
Footprint	Looks consistent	Layout shows exactly 3 pads, consistent with SOT-23-3.
Schematic symbol	Incomplete metadata	Symbol has 3 terminals, but all `Pin Type` values are Unspecified and no pin descriptions are present.
Pin descriptions	Mismatch / missing	Datasheet-based pin behavior exists, but project terminals do not carry pin descriptions.
Project description	Needs cleanup	Current description is not aligned with the datasheet’s clearer product description/application wording.

Key specs from the datasheet

Table

Spec	Value
Device type	Asymmetrical TVS diode array for RS-485 protection
Exact MPN	SM712-02HTG
Package	SOT23-3 / JEDEC TO-236
Pin count	3
Peak pulse power	600 W
Peak pulse current	19 A at 8/20 µs
Reverse standoff voltage	7.0 V from pin 3 to pin 1 or 2; 12.0 V from pin 1 or 2 to pin 3
Breakdown voltage	7.5 V / 13.3 V depending on direction
Clamp voltage	Up to 31 V at 19 A in one polarity; 19 V in the opposite polarity
Operating temperature	-40 °C to +125 °C

The datasheet-sync guidance says project metadata should use the exact MPN, manufacturer, package, and a clear functional description led by what the part does

Cross-check results Project properties

MPN: correct
Manufacturer Name: correct
Designator Prefix: D is appropriate for a diode device
Package or Case Code: acceptable but should ideally be SOT23-3 rather than the broader SOT-23
Part Type: currently Diodes, which is usable but not very specific; TVS Diode Array would better match the datasheet-sync guidance to use the functional category from the datasheet
Description: current text is somewhat inconsistent with the datasheet’s positioning. The datasheet describes the part as an RS-485 protection TVS diode array with asymmetrical working voltages, which is clearer than the current clamp-voltage-only phrasing.

Schematic symbol

The symbol contains exactly three terminal components:

What matches:

Pin numbers 1, 2, 3 are present
Terminal count matches the datasheet pin count exactly, which is a critical requirement

What is missing:

All three terminals have Pin Type: Unspecified
No Pin Description properties are present
No richer symbol metadata such as section/grouping, though for a 3-pin diode part that is less important than getting pin type and description right

Footprint

The layout contains:

a footprint container
exactly 3 pads, designators 1, 2, 3

That is consistent with the datasheet package being SOT23-3. So at a structural level, the footprint appears to match the package pin count.

Mismatches and flags

Table

Issue	Severity	Detail
Package metadata not fully specific	Low	Project says `SOT-23`; datasheet is more specifically `SOT23-3 / TO-236`.
Part Type too generic	Low	`Diodes` is broad; datasheet indicates `TVS diode array`.
Project description not ideal	Medium	Current description focuses on clamp values but not the part’s core function.
Pin Type missing on all pins	Medium	All terminals are `Unspecified`, which reduces symbol quality/ERC usefulness.
Pin descriptions missing	Medium	No terminal descriptions are present, so the symbol is incomplete from a library-quality standpoint.
Pin-name/function cross-check incomplete	Medium	The retrieved datasheet text gave pin-number-based electrical behavior, but not explicit named terminal labels in a clean pin table extract, so I can only verify count and numbering, not exact terminal naming text.

Recommended cleanup

Table

Property / Area	Recommended value
Part Type	`TVS Diode Array`
Package or Case Code	`SOT23-3`
Description	`RS-485 protection TVS diode array, asymmetrical -7 V to 12 V working range, 600 W, 19 A, SOT23-3`
Pin metadata	Add `Pin Type` and short `Pin Description` for pins 1, 2, 3

Bottom line

Good: MPN, manufacturer, datasheet presence, 3-pin symbol, and 3-pad footprint are all consistent.
Needs work: package specificity, part-type specificity, description quality, and especially terminal metadata.
No hard structural mismatch found between datasheet pin count and the current symbol/footprint.
Main mismatch is completeness, not geometry: the part is missing useful pin typing/description data expected for a polished part project

If you want, I can next help you generate the exact pin metadata to add for 1, 2, and 3.

Generate pin metadata

Tighten part metadata

List all mismatches

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.5k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k