I found a package mismatch: the WINGS datasheet linked by the existing guide describes a through-hole device, not this project’s surface-mount part. I’ll make the comparison explicitly variant-specific, using a documented SOT-23 S8050 and Nexperia’s non-A PMBT2222. I’ll leave the existing guide untouched.
S8050 transistor vs 2N2222: the selected S8050 has lower high-current saturation limits, while the selected 2N2222 variant tolerates more voltage. Choose S8050 when its lower saturation loss matters, or the non-A SOT-23 PMBT2222 when its higher collector-emitter rating matters, after checking drive and heating.
Comparison scope: This is a package-matched comparison of Shenzhen Hottech Electronics S8050 in SOT-23 and Nexperia PMBT2222, the non-A SOT-23 member of the 2N2222 family. It is not a comparison with 2N2222A or PMBT2222A, and it does not transfer through-hole ratings to surface-mount parts. The Hottech document identifies its manufacturer and SOT-23 package; the Nexperia document identifies PMBT2222 and its SOT23 package.[^flu...
The guide compares Hottech’s SOT-23 variant with Nexperia’s non-A PMBT2222, with manufacturer citations, test conditions, and a worked base-drive and loss example.
Values left out:
hFE: no matched collector-current and collector-emitter-voltage test conditions.
Transition frequency, switching times, capacitance, and leakage: no fully verified, like-for-like comparison established.
Thermal-resistance ranking: equivalent mounting conditions were not established.
Hottech revision/date and numeric pin labels: not established from the retrieved copy; none were invented.
Pinout risk: The selected surface-mount variants have matching terminal positions, but this does not verify the current library’s pad mapping. The WINGS source referenced by the existing guide describes a through-hole package and must not be used to assign this surface-mount part’s pins.