Part Review and Datasheet Update

Task completed.

4:10

Working.

Analyzing the PCB layout.

Collecting project information.

Researching 2 web sources.

Searching 3 domains.

Searching assets.

Search complete — 187 results across 4 domains.

Analyzing the PCB layout.

Addressing pin count discrepancies.

Analyzing the schematic.

Analyzing the PCB layout.

3 days

Set Datasheet URL to "https://www.qorvo.com/product...", Set Manufacturer Name to "Qorvo", and 5 more

Set Datasheet URL to "https://www.qorvo.com/products/d/da000811"

Set Manufacturer Name to "Qorvo"

Set Package or Case Code to "LGA-32"

Set Part Type to "RF Front-End Module"

Set Operating Voltage to "2.8–4.2"

Set Frequency to "868–928"

Set Max Current to "450"

3 days

Updated project description

Updated to: "868–928 MHz ISM-band RF front-end module with 1 W PA, LNA/bypass, and diversity antenna switch in 32-pin LGA package"

3 days

Set Pin Type to "Ground" on GND, GND, GND, and 9 more, Set Pin Description to "Ground" on GND, GND, GND, and 9 more, and 44 more changes

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set RFIO's Pin Type to "Bi-Directional"

Set RFIO's Pin Description to "868/900 MHz RFIO, DC blocked"

Set RFIO's Section to "RF"

Set RFIO's Pin Group to "RFIO"

Set RFIO's Pin Orientation to "Left"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set NC's Pin Type to "Not Connected"

Set NC's Pin Description to "Not connected in FEM"

Set NC's Section to "NC"

Set NC's Pin Group to "NC"

Set NC's Pin Orientation to "Left"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set CTL1's Pin Type to "Input"

Set CTL1's Pin Description to "ANT select control"

Set CTL1's Section to "Control"

Set CTL1's Pin Group to "CTL"

Set CTL1's Pin Orientation to "Left"

Set CTL2's Pin Type to "Input"

Set CTL2's Pin Description to "Tx/Rx select control"

Set CTL2's Section to "Control"

Set CTL2's Pin Group to "CTL"

Set CTL2's Pin Orientation to "Left"

Set CTL3's Pin Type to "Input"

Set CTL3's Pin Description to "LNA select control"

Set CTL3's Section to "Control"

Set CTL3's Pin Group to "CTL"

Set CTL3's Pin Orientation to "Left"

Set CTL4's Pin Type to "Input"

Set CTL4's Pin Description to "Power-down select control"

Set CTL4's Section to "Control"

Set CTL4's Pin Group to "CTL"

Set CTL4's Pin Orientation to "Left"

Set CTL5's Pin Type to "Input"

Set CTL5's Pin Description to "PA high-bias control"

Set CTL5's Section to "Control"

Set CTL5's Pin Group to "CTL"

Set CTL5's Pin Orientation to "Left"

Set VDIG's Pin Type to "Power In"

Set VDIG's Pin Description to "Digital VCC supply"

Set VDIG's Section to "Power"

Set VDIG's Pin Group to "VDIG"

Set VDIG's Pin Orientation to "Top"

Set LNA_VCC's Pin Type to "Power In"

Set LNA_VCC's Pin Description to "LNA VCC supply"

Set LNA_VCC's Section to "Power"

Set LNA_VCC's Pin Group to "LNA"

Set LNA_VCC's Pin Orientation to "Top"

Set LNA_BIAS's Pin Type to "Passive"

Set LNA_BIAS's Pin Description to "LNA linearity bias resistor node"

Set LNA_BIAS's Section to "Analog"

Set LNA_BIAS's Pin Group to "LNA"

Set LNA_BIAS's Pin Orientation to "Left"

Set LNA_IN's Pin Type to "Input"

Set LNA_IN's Pin Description to "LNA signal input, DC blocked"

Set LNA_IN's Section to "RF"

Set LNA_IN's Pin Group to "LNA"

Set LNA_IN's Pin Orientation to "Left"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set ASW_RX's Pin Type to "Output"

Set ASW_RX's Pin Description to "Antenna switch RX output, DC blocked"

Set ASW_RX's Section to "RF"

Set ASW_RX's Pin Group to "ASW"

Set ASW_RX's Pin Orientation to "Right"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set ANT2's Pin Type to "Bi-Directional"

Set ANT2's Pin Description to "Antenna 2 RF I/O, DC blocked"

Set ANT2's Section to "RF"

Set ANT2's Pin Group to "ANT"

Set ANT2's Pin Orientation to "Right"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set ANT1's Pin Type to "Bi-Directional"

Set ANT1's Pin Description to "Antenna 1 RF I/O, DC blocked"

Set ANT1's Section to "RF"

Set ANT1's Pin Group to "ANT"

Set ANT1's Pin Orientation to "Right"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set PA_VCC2's Pin Type to "Power In"

Set PA_VCC2's Pin Description to "PA second-stage battery bias"

Set PA_VCC2's Section to "Power"

Set PA_VCC2's Pin Group to "PA"

Set PA_VCC2's Pin Orientation to "Top"

Set PA_VCC1's Pin Type to "Power In"

Set PA_VCC1's Pin Description to "PA first-stage battery bias"

Set PA_VCC1's Section to "Power"

Set PA_VCC1's Pin Group to "PA"

Set PA_VCC1's Pin Orientation to "Top"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set PA2_IN's Pin Type to "Input"

Set PA2_IN's Pin Description to "PA 2nd-stage signal input"

Set PA2_IN's Section to "RF"

Set PA2_IN's Pin Group to "PA"

Set PA2_IN's Pin Orientation to "Left"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set PA1_OUT's Pin Type to "Output"

Set PA1_OUT's Pin Description to "PA 1st-stage output, DC blocked"

Set PA1_OUT's Section to "RF"

Set PA1_OUT's Pin Group to "PA"

Set PA1_OUT's Pin Orientation to "Right"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set PA1_IN's Pin Type to "Input"

Set PA1_IN's Pin Description to "PA 1st-stage input, DC blocked"

Set PA1_IN's Section to "RF"

Set PA1_IN's Pin Group to "PA"

Set PA1_IN's Pin Orientation to "Left"

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Ground"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

Set NC's Pin Type to "Not Connected"

Set NC's Pin Description to "Not connected in FEM"

Set NC's Section to "NC"

Set NC's Pin Group to "NC"

Set NC's Pin Orientation to "Right"

3 days

Set Implementation Details to "Discontinued product. 50Ω RF ...", Set Operating Temperature to "-40 to +85", and 1 more

Set Implementation Details to "Discontinued product. 50Ω RF ports. LNA_BIAS may be left floating for high-bias mode or tied to GND through 51kΩ for low-bias..."

Set Operating Temperature to "-40 to +85"

Set Compliance to "RoHS, Lead-Free, Halogen-Free; ECCN EAR99; ITAR No"

3 days

Set Pin Type to "Ground" on GND, Set Pin Description to "Central ground paddle / extra..." on GND, and 3 more changes

Set GND's Pin Type to "Ground"

Set GND's Pin Description to "Central ground paddle / extra footprint pad; not listed in 32-pin datasheet table"

Set GND's Section to "Ground"

Set GND's Pin Group to "Ground"

Set GND's Pin Orientation to "Bottom"

3 days

flux

0:07

Updated the RFFM6901 part metadata with the official Qorvo datasheet URL, manufacturer/package/spec properties, project description, and synchronized terminal pin descriptions/types to the datasheet. The main issue found is a 32-pin datasheet table versus 33 project terminals/footprint pads; the extra GND pin 33 was documented as likely central ground paddle/extra footprint pad for review. Full details are in the RFFM6901 Datasheet Synchronization Report.

Fix extra GND

Identify ground paddle

Clarify pin count

Run ERC/DRC

Verify land pattern

3 days

VDIG

Pin Number

GND

Pin Number

GND

Pin Number

PA1_IN

Pin Number

LNA_BIAS

Pin Number

PA_VCC2

Pin Number

CTL4

Pin Number

LNA_IN

Pin Number

GND

Pin Number

LNA_VCC

Pin Number

GND

Pin Number

PA1_OUT

Pin Number

ASW_RX

Pin Number

GND

Pin Number

RFIO

Pin Number

GND

Pin Number

GND

Pin Number

GND

Pin Number

GND

Pin Number

PA2_IN

Pin Number

GND

Pin Number

GND

Pin Number

CTL1

Pin Number

ANT1

Pin Number

ANT2

Pin Number

GND

Pin Number

PA_VCC1

Pin Number

CTL5

Pin Number

CTL3

Pin Number

CTL2

Pin Number

GND

Pin Number

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.9k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M

Inspect

RFFM6901

Controls

Properties

Max Current

450 mA

Operating Temperature

-40 to +85 °C

Designator Prefix

Compliance

RoHS, Lead-Free, Halogen-Free; ECCN EAR99; ITAR No

Package or Case Code

LGA-32

Manufacturer Part Number

RFFM6901

Manufacturer Name

Qorvo

Part Type

RF Front-End Module

Datasheet URL

mouser.com/datasheet/2/412/RFFM6901%20Data%20Sheet-1112583.pdf?srsltid=AfmBOoqj8mf54pxk7pxdUgXxEFk4Fy3fEp9k6zKXymx2RuhPXghgk__x

License

creativecommons.org/licenses/by/4.0/

Frequency

868–928 MHz

Operating Voltage

2.8–4.2 V

Implementation Details

Discontinued product. 50Ω RF ports. LNA_BIAS may be left floating for high-bias mode or tied to GND through 51kΩ for low-bias LNA current. Evaluation board uses 0.1µF and 1nF decoupling near supply/control pins. Control logic HIGH min 2.5V; LOW max 0.3V.

Availability & Pricing

No results found.

Assets

Default