Part Information Review and Datasheet Update

flux

Reviewed the RFFC5072 part project and updated the part metadata:
  • Set Datasheet URL to Qorvo’s official document link: https://www.qorvo.com/products/d/da000735
  • Added metadata:
    • Manufacturer: Qorvo
    • MPN: RFFC5072
Key datasheet specs:
  • Function: Wideband synthesizer/VCO with integrated 6 GHz RF mixer
  • Package: 32-pin QFN, 5 mm × 5 mm, exposed paddle
  • Supply: 2.7 V to 3.3 V, abs max 3.6 V
  • LO range: 85 MHz to 4200 MHz
  • Mixer range: 30 MHz to 6000 MHz
  • Reference input: 10 MHz to 104 MHz
  • Typical IIP3: up to +23 dBm
  • Exposed paddle: ground, low-impedance PCB ground connection required
Cross-check results:
  • Pin count matches: 32 pins + exposed paddle = 33 pads.
  • Footprint broadly matches QFN-32 5 mm × 5 mm with exposed paddle.
  • Symbol pin numbering matches the datasheet pin table.
  • Main mismatches/cleanup items:
    • Pins 23/24/27/28 are named MIX_IPP, MIX_IPN, MIX_OPN, MIX_OPP; datasheet names them MIX2_IPP, MIX2_IPN, MIX2_OPN, MIX2_OPP.
    • TM pin 12 is marked Power Out, but datasheet says connect to ground.
    • EPAD is marked Power Out, but datasheet requires ground.
    • Several digital/control pins are marked Unspecified; they should be refined per datasheet directionality.
    • Pin descriptions are sparse; adding datasheet-derived descriptions would improve library quality.
A

adrian95

fix the several digital/control pin that are marked unspecified, refer to the proper pin type based on the datasheet.

flux

I’ll update the RFFC5072 terminal pin types in-place using the datasheet pin functions, then verify the properties were changed correctly.

flux

Updated and verified the previously unspecified RFFC5072 pins:
  • ENBL/GPO5: Bi-Directional
  • EXT_LO: Input
  • EXT_LO_DEC: Passive
  • REXT: Passive
  • MODE/GPO6: Bi-Directional
  • REF_IN: Input
  • RESETX: Input
  • ENX: Input
  • SCLK: Input
  • SDATA: Input
I also added datasheet-derived pin descriptions for each of those terminals.
Fix remaining mismatches
Run ERC review
Complete pin descriptions
Verify footprint geometry
Update RF pin roles
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet