I’ll research the PCC03SAAN header’s specifications and alternatives, then create a cited application and usage guide in the project files, clearly marking anything I can’t verify.
I verified the header’s 3 A rating, 2.54 mm pitch, and −65°C to +125°C operating range. The datasheet does not specify a voltage rating or complete PCB land pattern; I’ll flag those gaps and distinguish the alternatives from verified drop-in replacements.
The Sullins Connector Solutions PCC03SAAN is a three-contact, single-row, straight through-hole male breakaway header with 0.100-inch (2.54 mm) contact spacing. It provides a removable board-to-board or cable-to-board connection; practical uses include low-voltage GPIO, sensor, and service interfaces, with the signal assignment defined by the circuit designer rather than by the connector.
1. Quick Specifications
Rating interpretation: This is a passive connector, not a powered IC. The reviewed Sullins catalog does not provide a separate Absolute Maximum Ratings table or a recommended electrical operating-condition table; the published connector ratings below must n...
Created the cited PCC03SAAN Application and Usage Guide in the project files, covering all seven requested sections, practical wiring and layout guidance, and two documented alternatives. The guide explicitly flags the unverified voltage rating, PCB hole/pad dimensions, and drop-in compatibility rather than inventing specifications.