Ferrite Bead Operating Conditions
1:04
The MPZ2012S601AT000 ferrite bead is a passive EMI filter and so the datasheet does not specify any “supply voltage,” “input/output voltage” or a formal “recommended operating temperature range” (since it simply passes whatever DC buss it’s placed on). The only environmental limits called out are storage conditions and current-vs-temperature derating.
Table
| Parameter | Specification | Notes |
|---|---|---|
| Storage Temperature Range | 5 °C to 40 °C | Storage only (≤12 months) |
| Storage Humidity | 10 % to 75 % RH | Storage only |
| Rated Current | 2 A max | At 25 °C; see derating curve above 85 °C |
| Derating Threshold | 85 °C | Above this temperature, allowable current decreases per graph |
| Intended Application Environment | General electronic equipment | AV, telecom, home appliances, computers, measurement, etc. |
| Prohibited Environments | Corrosive gases (salt, acid, alkali, etc.) | Do not use or store under these conditions |
| Pre-heat During Soldering | ΔT ≤ 150 °C | Temperature difference between solder and chip must not exceed 150 °C |
No voltage-based operating conditions are provided because this bead is purely an impedance element on a DC or low-frequency rail.
Derating graph
High-current bead
Power dissipation
Max ambient temperature
Soldering guidelines
294 days
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.