Part Information Review and Update

Thought for 2 mins 9 sec

I reviewed the part against the existing project data and the official Analog Devices datasheet already linked in the project, so no web lookup or datasheet-property update was needed.

Part metadata check

Table

Field	In project	In datasheet	Result
Manufacturer	Analog Devices	Analog Devices	Match
MPN	MAX96724RGTN/V+	MAX96724RGTN/V+	Match
Datasheet URL	`https://www.analog.com/MAX96724R/datasheet`	Official Analog Devices datasheet landing page	Match
Description	"Quad Tunneling GMSL2/1 to CSI-2 Deserializer Ordering Information"	Quad GMSL2/1 to CSI-2 deserializer	Mostly match, but project description looks like ordering text rather than the clean device description
Package / case code	`TO`	56-pin TQFN-EP, package code T5688; also 56-pin TQFN-SW, package code T5688Y	Mismatch

Key specs from the datasheet

Table

Category	Datasheet value
Function	Quad GMSL2/1 deserializer to 1, 2, or 4 MIPI D-PHY or C-PHY outputs
Forward link rates	3 Gbps or 6 Gbps per GMSL2 link
Reverse link rate	187.5 Mbps for GMSL2
MIPI support	D-PHY v1.2 up to 2.5 Gbps/lane, C-PHY v1.0 up to 5.7 Gbps/lane
Inputs	Up to 4 GMSL links
Temperature grade	-40 C to +105 C ambient for MAX96724RGTN/V+
Package	56-pin TQFN-EP, small 8 x 8 mm package
Supply rails	VTERM 1.14 V to 1.26 V, VDD18 1.7 V to 1.9 V, VDD 0.95 V to 1.05 V or 1.14 V to 1.26 V, VDDIO 1.7 V to 3.6 V

Symbol and pin-count cross-check

Table

Check	Result
Main numbered pins	Symbol includes pins 1 through 56
Exposed pad	Symbol also includes EP
Total electrical contacts	57 terminals in the project = 56 numbered pins + exposed pad
Pin naming	Core names align well with the datasheet naming for the R variant
Variant handling	The symbol correctly uses N.C. entries for pins 43 to 54 for the MAX96724R variant

Pin-description cross-check

Table

Area	Datasheet expectation	In symbol	Result
GMSL serial links	SIOA/B/C/D differential pairs	Present	Match
Multifunction pins	MFP0-MFP8 with shared functions	Present, including combined labels like CFG1/MFP6, SDA1/MFP7, SCL1/MFP8	Match
Control/misc	CFG0, PWDNB, SDA, SCL, X1/OSC, X2, XRES	Present	Match
Power	VDD18, VDDIO, VDD, VTERM, CAP_VDD, EP	Present	Match
R-variant upper CSI outputs	Pins 43-54 may be N.C. for MAX96724R	Implemented as N.C. pads	Match

Footprint cross-check

Table

Check	Result
Footprint exists	Yes
Pad count	Footprint has pads corresponding to all symbol terminals, including EP
Pad naming consistency	Pad names match the symbol terminal names
Package metadata consistency	Not consistent with datasheet because project package property says `TO`, while datasheet package is 56-pin TQFN-EP / TQFN-SW

Issues flagged

Table

Severity	Issue	Notes
High	Package/Case Code property is wrong	`TO` does not match the datasheet package. It should reflect 56-pin TQFN-EP and ideally package code T5688 or T5688Y, depending intended footprint variant.
Medium	Description is not cleanly normalized	Current description reads like ordering-info text rather than a concise part description.
Medium	Pin functional metadata is incomplete in-project	All terminals are currently typed as Pin Type: Unspecified and there are no rich in-project pin descriptions, even though the symbol names themselves are mostly correct.
Low	Footprint geometry not fully verified from current layout inspect output	I could confirm existence, pad naming, and pad count, but not full mechanical dimensions from the current layout data alone.

Bottom line

Table

Category	Verdict
MPN	Good
Datasheet link	Good
Pin count	Good
Symbol naming	Good overall
R-variant pin mapping	Good
Footprint pad presence	Good
Package property	Needs correction
Rich pin descriptions/properties	Could be improved

The only clear hard mismatch I found is the package metadata. The symbol itself appears substantially consistent with the MAX96724R datasheet, including the 56 + EP terminal structure and the N.C. treatment for pins 43-54 on the R variant.

Fix package metadata

Add pin descriptions

Check footprint dimensions

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.6k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k
Push Button
A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
jharwinbarrozo
490.7k
XY301V-A-5.0-3P
Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary
jharwinbarrozo
537.9k