Part Datasheet Review and Validation

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’m blocked from executing the requested review because the session has no remaining tool credits, so I can’t inspect the part properties, search for the datasheet, update the Datasheet field, or cross-check symbol/footprint pins against the official document.
What remains to be done:
  • Inspect the existing part metadata: MPN, package, pin count, description, and properties.
  • Check whether a Datasheet URL is already set.
  • If missing, find the official manufacturer datasheet URL and update the Datasheet property.
  • Verify schematic symbol pin names/numbers/functions against the datasheet.
  • Verify the PCB footprint package, pad count, and pin mapping against the datasheet-recommended package.
  • Summarize key electrical/mechanical specs.
  • Flag any mismatches or unresolved risks.
Current project context indicates the part is likely MAX25432BATLG/V+ with a 41-pad package, but I could not validate that against the datasheet in this session.
Rerun after credits
List target parts
Manual footprint check
Manual validation checklist

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    step

    MAX25432BATLG_V+

    21-0141_T40665C_MXM.step3D Model
    kicad_mod

    MAX25432BATLG_V+

    21-0141_T4066&plus_5C_MXM-M.kicad_modFootprint
    MAX25432BATLGV+-thumb.png

    MAX25432BATLGV+-thumb.png

    MAX25432BATLGV+-thumbThumbnail
    MAX25432BATLG_V+

    MAX25432BATLG_V+

    MAX25432BATLG_V+ MAX25432BATLG_V+_0_1 Symbol.svgDefault

    MAX25432BATLG/V+

    MAX25432BATLG/V+ thumbnail
    USB Type C PMIC 40-TQFN (6x6)
    The MAX25432 combines an automotive-grade buckboost controller capable of full-range 3.3V to 21V programmable power supply (PPS) at up to 6.35A, USB Power Delivery (USB PD) analog front-end (AFE), legacy USB charging support, and USB Type-C® protection switches for automotive USB host or downstream-facing (DFP) applications. The USB TypeC protection switches provide automotive system-level ESD protection and 24V short-circuit protection for D+, D-, CC1, CC2, and VCONN. The device can optionally support legacy charging modes for older passenger phones including BC1.2, Apple® Charge, Apple CarPlay®, Apple MFi, and USB On-The-Go (OTG). The MAX25432B integrates a USB PD AFE, which supports the USB-IF Type-C Port Controller Interface (TCPCI) specification and can interface with any I2C controller in the application. The MAX25432A provides configuration channel (CC) signal pass-through protection for an external USB PD controller. P-suffix and G-suffix devices include intelligent detection and protection to avoid high short-circuit currents flowing from the car battery through the cable shield to ground during fault events, thus preventing car module damage. The MAX25432 is available in a small, 6mm x 6mm, 40- pin TQFN-EP package and requires very few external components. The MAX25432 evaluation (EV) kit and collateral provide a convenient platform to the design engineer for rapid evaluation with reduced test and firmware development time.
    Integrated I2C Buck-Boost Controller with PPS 4.5V to 36V Input Operating Range 3.3V to 21V Constant Voltage, 10mV LSB 1A to 6.35A Current Limit, 25mA LSB 220kHz, 300kHz, and 400kHz SwitchingFrequency VBUS Cable Compensation up to 516mΩ External Frequency Synchronization and SpreadSpectrum for Reduced EMI USB PD 3.1 Type-C Port Controller USB-IF Compliant - TID 9154 Up to 800mV Ground Offset Pairs with ADI TCPM for Turn-Key Solution MAX25432BATLP Enables: ADI TCPM Alternate Mode and Dual-Role Port Improved CC Detection Advanced Monitoring Algorithms (V, T) Dynamic Loop Control
    Highest Performance, Safest, and Lowest Cost Passenger Cable-Shield Short-to-Battery Protection Minimizes Short-Circuit Currents with a Small,Single-FET Solution Integrated Current-Sense Amplifiers, ADC and DAC Integrated 3.3V to 5.0V, 1.5W, Smart, Reliable VCONN Switches and Protection, 50mA to 500mA OCP Integrated 24V DC Protection on Protected HVD+, HVD-, HVCC1, HVCC2 Outputs Integrated Legacy USB 2.0 Charging Support Including BC1.2, Apple CarPlay, OTG, and Apple MFi Rev 3x Integrated ±15kV Air-Gap/±8kV Contact Discharge ISO 10605 and IEC 61000-4-2 ESD Protection -40°C to +125°C Operating Temperature Range 40-Pin, 6mm x 6mm, TQFN Package with EP AEC-Q100 and AEC-Q006 Qualified
    #CommonPartsLibrary #IntegratedCircuit #PowerManagement

    Properties

    MAX25432BATLG/V+

    Analog Devices Inc./Maxim Integrated

    Power Management

    analog.com/media/en/technical-documentation/data-sheets/max25432.pdf

    U

    creativecommons.org/licenses/by/4.0/

    parametric-v1

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls