Grouped all 20 pins by function and set each pin’s Section equal to its Pin Group:

All pin numbers, names, electrical types, footprint mappings, and geometry were preserved. This part has no documented 3V3 or GND terminals.

Confirmed: pins 4 and 5 are currently mislabeled TD2-_1 and TD2-_2, despite being grouped as center taps. I’ll verify the manufacturer pin names, rename both CT terminals correctly, and preserve their pin numbers, footprint mapping, groups, and symbol positions. This edit requires Agent mode; click the button to continue.

I’ll verify the manufacturer pinout, correct pins 4 and 5, then re-check the symbol mapping.

Fixed the symbol labeling:

Pin numbers, symbol positions, footprint mappings, and PoE/Center Taps grouping were preserved.