Pin Function Grouping for Component
Worked for 2 mins 19 sec
Done. I generalized the functional groups across all 81 pins and added
Section to every pin with the same value as its Pin Group.Open items:
- Some generalized labels like
EthernetandStatus/Debugare accepted but not in Flux’s suggested autocomplete list.
Suggested next steps:
- Review the symbol sections visually.
- If desired, I can further reduce groups to only Flux-suggested values like
Power,Ground,Control,Interface,Analog,Debug, andClock.
Use only Flux-suggested values for Pin Group and Section across all pins.
Thought for 14 sec
I’ll normalize the remaining custom group labels to Flux-suggested values only, then verify every pin’s Pin Group and Section uses allowed values.
Worked for 1 min 13 sec
Done. I normalized all pins to Flux-suggested
Pin Group and Section values only, keeping each pin’s Section equal to its Pin Group.Open items:
- None.
Suggested next steps:
- Review the symbol layout by section.
- Run a final part QA check before publishing.
QA, docs and publish
Run final QA
Update review doc
Check publish readiness
Verify datasheet URL
