Please fix this, based from this flag issue:
Library part is unusable for the Hall-effect KS-33 application: footprint includes unrelated electrical switch-contact pads, a 28.6 x 19 mm rectangle, and incorrect central Ø5.25 mm opening.
I’ll inspect the footprint and check the KS-33 variant’s mechanical requirements, then remove the unrelated features and correct any geometry supported by a reliable drawing.
Thought for 17 mins 47 sec
3 hrs ago
Thought for 7 sec
Created 2 tasks.
1/2 Inspect and correct KS-33 footprint using verified mechanical evidence
Inspect and correct KS-33 footprint using verified mechanical evidence
Verify corrections and identify any remaining fit requirements
I removed the unrelated contact pads and terminals, the 28.6 × 19 mm rectangle, and the flagged Ø5.25 mm opening; details are in Footprint Repair. The draft remains incomplete and not manufacturing-ready because I couldn’t verify the Hall-effect variant’s mounting geometry; I also filed an internal quality ticket for Flux review. Can you provide the exact magnetic-switch part number or mechanical drawing so I can finish the footprint accurately?