Part Review and Datasheet Update

Worked for 4 mins 43 sec

Completed the part review and set the official Espressif Datasheet URL on the part. I created the full review here: ESP32-C3-DEVKITM-1 Part Review.

Open items:

J3 pin numbering/orientation should be confirmed against the footprint geometry before publishing.
Pin descriptions are sparse and should be expanded with official GPIO/ADC/UART/USB/strapping functions.
Package/mechanical metadata is missing or too generic.

Suggested next steps:

Update terminal Pin Description properties from the official Espressif pin table.
Verify and, if needed, correct J3 footprint pad numbering.
Add explicit package/mechanical metadata for the 2x15 header dev-board footprint.

adrian95

Fix the pin descriptions, verify J3 numbering, and add the missing package metadata.

Thought for 6 sec

flux

I’ll update the terminal descriptions and package metadata, then inspect the footprint/pad ordering to verify whether J3 is intentionally reversed or needs correction.

Worked for 1 min 1 sec

flux

Pin descriptions are updated from the official Espressif J1/J3 header table. I’m adding the package metadata and then I’ll verify the final mapping.

Worked for 1 min 53 sec

flux

Completed the fixes: all 30 terminals now have official Espressif pin descriptions, package/mechanical metadata was added, and J3 numbering was verified as reversed physical order: Flux pins 16–30 map to J3-15 through J3-1.

Updated report: ESP32-C3-DEVKITM-1 Part Review.

Open items:

None from the requested fixes.

Suggested next steps:

Run the part review checks to confirm metadata/terminal warnings are cleared.
Publish or republish the corrected part if this is intended for reuse.

Review and export

Run part review

Check BOM metadata

Export validation report

Inspect commit diff

Files

Pins

Symbol

Layout

3D View

ESP32-C3-DEVKITM-1