Part Information Review and Validation

Thought for 2 mins 30 sec

I reviewed the current part project against the datasheet using the datasheet as the source of truth and checked that the symbol/footprint pin count matches exactly, which is the right verification flow for part projects

Result

Datasheet URL already exists in project properties, so no web lookup or property update was needed.
Pin count matches: datasheet says 9-pin LGA; the project has 9 symbol terminals and 9 footprint pads.
Main issues found:
- All terminal Pin Type properties are currently Unspecified
- Several terminal names use normalized variants instead of exact datasheet naming:
  - INTN vs datasheet INTn
  - CSN vs datasheet CSn
  - VSS_1 / VSS_2 vs datasheet VSS for pins 8 and 9
No obvious symbol-to-footprint pin mapping mismatch was found.

Available part information Current project properties

Table

Field	Current value	Check
Manufacturer Part Number	ENS160-BGLT	OK
Manufacturer Name	ScioSense	Acceptable, datasheet gives ScioSense B.V.
Designator Prefix	IC	Acceptable for an IC/sensor
Datasheet URL	Set	OK
Description	Air Quality Sensors ENS160-BGLT LGA9 T&R 1K5	Usable, but not ideal as a functional description
Package / Case	Not present as property	Missing
Part Type	Not present as property	Missing
Operating Voltage	Not present as property	Missing
Operating Temperature	Not present as property	Missing

Datasheet-derived part summary

Table

Item	Datasheet value
Part	ENS160-BGLT
Manufacturer	ScioSense B.V.
Type	Digital multi-gas sensor
Sensing technology	MOX, 4 sensor elements
Outputs	eCO2, TVOC, AQI, plus raw data
Package	9-pin LGA
Package size	3.0 mm × 3.0 mm × 0.9 mm max
Interfaces	I2C and 4-wire SPI slave
VDD	1.71 V to 1.98 V
VDDIO	1.71 V to 3.6 V
Temperature range	-40°C to +85°C
I2C address select	0x52 / 0x53 via ADDR
SPI/I2C select	CSn low = SPI, high = I2C

Symbol and pin cross-check Pin verification

Table

Pin #	Project terminal	Datasheet name	Status	Notes
1	MOSI_/_SDA	MOSI / SDA	OK	Name formatting differs only stylistically
2	SCLK_/_SCL	SCLK / SCL	OK	Name formatting differs only stylistically
3	MISO_/_ADDR	MISO / ADDR	OK	Name formatting differs only stylistically
4	VDD	VDD	OK
5	VDDIO	VDDIO	OK
6	INTN	INTn	Minor mismatch	Case/style mismatch
7	CSN	CSn	Minor mismatch	Case/style mismatch
8	VSS_1	VSS	Minor mismatch	Split naming for duplicate ground pin
9	VSS_2	VSS	Minor mismatch	Split naming for duplicate ground pin

Pin type/property audit

All 9 terminals currently have Pin Type = Unspecified. For an IC-style part, pin properties should be explicitly assigned from the datasheet rather than left unspecified

Recommended pin types:

Table

Project terminal	Recommended Pin Type	Short description
MOSI_/_SDA	Bi-Directional	SPI MOSI / I2C SDA
SCLK_/_SCL	Input	Serial clock input
MISO_/_ADDR	Bi-Directional	SPI MISO / I2C addr
VDD	Power In	Core supply
VDDIO	Power In	Interface supply
INTN	Output	Interrupt output
CSN	Input	Interface select
VSS_1	Ground	Ground
VSS_2	Ground	Ground

Footprint cross-check What matches

The project contains a default footprint asset: ENS160BGLT.kicad_mod
The project also includes a 3D model
The footprint has 9 pads
Pad labels match the symbol pin mapping

Datasheet package reference

9-pin LGA
3.0 mm × 3.0 mm
1.05 mm pitch
Recommended land pattern: add 0.05 mm around nominal lead width/length

Limitation

I could confirm pad count and pad naming, but the indexed layout data did not expose explicit pad geometry values like exact pad size, courtyard, or body outline dimensions. So I can say the footprint structure appears consistent, but I could not fully dimension-verify the land pattern numerically from the project data alone.

Key mismatches / gaps to flag

Table

Area	Finding	Severity
Pin types	All pins are Unspecified	Medium
Pin naming	`INTN` vs INTn	Low
Pin naming	`CSN` vs CSn	Low
Pin naming	`VSS_1`, `VSS_2` vs datasheet VSS	Low
Metadata	Missing Part Type property	Medium
Metadata	Missing Package / Case property	Medium
Metadata	Missing electrical summary properties	Low
Footprint geometry	No explicit pad dimensions available in indexed project data	Low

Recommended metadata additions

Based on the datasheet and the project-property sync rules

Table

Property	Recommended value
Manufacturer Name	ScioSense B.V.
Part Type	Sensor
Package or Case Code	LGA-9, 3 mm × 3 mm × 0.9 mm
Operating Voltage	3.6 for project max field only if you want interface max captured, or 1.98 if you want core VDD max captured; this one needs a convention decision
Operating Temperature	-40°C to +85°C

Bottom line

MPN, datasheet presence, symbol pin count, and footprint pad count are all good.
The biggest correctness gap is that the terminals are not fully typed/configured.
The only naming mismatches are minor capitalization/duplicate-ground naming differences.
The footprint appears structurally correct, but I could not numerically confirm pad geometry from the available project layout data.

If you want, I can next fix the terminal properties and metadata so this part project is fully datasheet-aligned.

Fix pin properties

Add missing metadata

Check footprint dimensions

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.6k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k
Push Button
A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
jharwinbarrozo
490.7k
XY301V-A-5.0-3P
Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary
jharwinbarrozo
537.9k