Reviewed the E32-433T30D part metadata, symbol terminals, footprint outline/pads, and official datasheet sources. The Datasheet URL was already set to an official CDEBYTE endpoint, so I did not overwrite it; I also found a newer official product-page manual endpoint.

Main findings: pin count and symbol mapping match the expected 11 terminals, but pin descriptions/types are mostly missing, mechanical holes should be clearly marked non-electrical, and exact pad drill/pitch still needs mechanical drawing verification. Full review saved in part-review-e32-433t30d.

I’ll update each terminal with datasheet-based pin descriptions and electrical pin types, then re-read the part to confirm the properties are applied.

Pin descriptions are now populated for all 11 terminals. I’m correcting VCC to the standard Power In pin type, then I’ll verify the result.

Updated all 11 terminals directly in the part with datasheet-based Pin Description values and standard Pin Type values. Verified the result: M0/M1/RXD are Input, TXD/AUX are Output, VCC is Power In, GND is Ground, and the four fixed orifices are Passive.

Open items:

Suggested next steps: