XIAO ESP32-C6 Shield Design
Make me a shield with DW3300QSR for Seeed Studio's Xiao ESp32C6
Thought for 5 sec
I’ll design a XIAO ESP32-C6 shield around the DW3300QSR: first I’ll inspect the existing DW3300QSR part/project, then define the XIAO-to-UWB interface, add the required connectors/support passives, wire and verify the schematic before proposing layout.
Thought for 28 sec
I started the DW3300QSR XIAO ESP32-C6 shield design and set up the work plan, but execution stopped before I could inspect or modify the schematic.
Planned next steps:
- Inspect the existing DW3300QSR component pins and current project state.
- Define the Seeed XIAO ESP32-C6 shield header mapping.
- Add XIAO-compatible headers, DW3300QSR support passives, power decoupling, SPI/control wiring, reset/IRQ lines, and any required RF/UWB notes.
- Create/update the project specification and power budget.
- Run schematic review/ERC and fix all unresolved issues before moving to layout.
No schematic changes were made yet.
Set IRQ/reset pins
Add headers and SPI
Add debug features
Check DW3300 datasheet
Document requirements
Name
Pin #
Type
Part Type
Terminal Order
IRQ/GPIO8
1
Unspecified
Terminal
GPIO6_/_~EXTRXE_
2
Unspecified
Terminal
SPI2CLK
3
Unspecified
Terminal
SPI2MISO
4
Unspecified
Terminal
GPIO5_/_~EXTTXE
5
Unspecified
Terminal
IRQ2
6
Unspecified
Terminal
SPI2MOSI
7
Unspecified
Terminal
GPIO4/_EXTPA
8
Unspecified
Terminal
GPIO7/_SYNC
9
Unspecified
Terminal
GND_1
10
Unspecified
Terminal
GND_2
11
Unspecified
Terminal
GND_3
12
Unspecified
Terminal
RF2
13
Unspecified
Terminal
GND_4
14
Unspecified
Terminal
GND_5
15
Unspecified
Terminal
GND_6
16
Unspecified
Terminal
GND_7
17
Unspecified
Terminal
RF1
18
Unspecified
Terminal
DW3300QSR
