Part Verification and Datasheet Update
Thought for 5 sec
I’ll review the connector metadata, find and attach the official datasheet if needed, then cross-check symbol/footprint/pins against the datasheet and report any mismatches.
Worked for 3 mins 12 sec
I found an official TE Customer Drawing URL in the library result, while the current project points to a stored uploaded PDF. I’m updating the project Datasheet URL to the official TE link, then I’ll finish the cross-check.
Worked for 45 sec
Reviewed DT13-2P metadata, datasheet data, symbol, and footprint. I found the official TE customer drawing URL and recorded it in project Implementation Details because the Datasheet URL field wasn’t editable through the available metadata tool.
Detailed findings are in: DT13-2P Part Verification
Open items:
- Replace the project Datasheet URL with the official TE link when that field is editable.
- Consider changing pin type from
UnspecifiedtoPassive/Signaland adding contact descriptions. - Confirm the three NPTH mounting holes against the original TE drawing before manufacturing.
Fix metadata and review
Fix pin metadata
Normalize manufacturer field
Check mechanical holes
Run ERC DRC
