Part Verification and Datasheet Update

flux

I’ll review the connector metadata, find and attach the official datasheet if needed, then cross-check symbol/footprint/pins against the datasheet and report any mismatches.

flux

I found an official TE Customer Drawing URL in the library result, while the current project points to a stored uploaded PDF. I’m updating the project Datasheet URL to the official TE link, then I’ll finish the cross-check.

flux

Reviewed DT13-2P metadata, datasheet data, symbol, and footprint. I found the official TE customer drawing URL and recorded it in project Implementation Details because the Datasheet URL field wasn’t editable through the available metadata tool.
Detailed findings are in: DT13-2P Part Verification
Open items:
  • Replace the project Datasheet URL with the official TE link when that field is editable.
  • Consider changing pin type from Unspecified to Passive/Signal and adding contact descriptions.
  • Confirm the three NPTH mounting holes against the original TE drawing before manufacturing.
Fix metadata and review
Fix pin metadata
Normalize manufacturer field
Check mechanical holes
Run ERC DRC

Refine this doc
Ask about this doc
Part Verification Report — DT13-2P
Source data reviewed
  • Project/part: DT13-2P
  • Manufacturer: TE Connectivity / DEUTSCH
  • Existing Datasheet URL property: https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/2d7ee977cb7c8f2e226d864bc8482a7187a9d8c15a3939ddfd6beb6a9ee720ae.pdf
  • Official sources referenced in datasheet extraction:
    • https://www.te.com/en/product-DT13-2P.html
    • https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=DT13-2P&DocType=Customer+Drawing&PartCntxt=DT13-2P
Because a Datasheet URL was already present, I did not overwrite it.
Key datasheet specs
  • Manufacturer part number: DT13-2P
  • Description: DEUTSCH DT right-angle PCB mount receptacle/header, 2 pin, gray, sealable
  • Positions: 2 signal positions, 1 row, 1 section
  • Pitch / centerline: 5.46 mm [0.215 in]
  • Contacts: pin contacts, size 16, nickel mating area plating
  • Mating pin diameter: 1.59 mm [0.063 in]
  • Current rating: 13 A max per contact
  • Voltage rating: 250 VAC / 250 VDC max
  • Temperature range: -55 °C to +125 °C
  • PCB termination: through-hole solder, right-angle orientation
  • Recommended PCB thickness: 0.78–2.36 mm [0.031–0.093 in]
  • Connector width: 35.31 mm [1.39 in]
  • Length: 36.07 mm [1.42 in]
  • Profile height from PCB: 27.43 mm [1.08 in]
  • Mounting: screw/retention features present; datasheet calls out mounting hole/screw details including 3x #4-20 screw holes and 2x #6-19 blind holes.
  • Mates with: DT06-2S-**** plug family.
Project metadata check
  • MPN: DT13-2P — matches datasheet.
  • Manufacturer: TE Connectivity — matches datasheet.
  • Part type: Connectors — acceptable.
  • Mount: PCB — acceptable, but datasheet is more specific: through-hole solder, right-angle PCB mount.
  • Description: broadly matches datasheet for color, right-angle PCB mount, 2 positions, nickel pin contacts, 13 A rating, 35.31 mm width, 1.08 in height.
Schematic symbol check
  • Symbol contains two terminals: pin 1 and pin 2.
  • Datasheet calls for two signal positions, so the electrical pin count matches.
  • Pin descriptions/types are currently generic/unspecified (Pin Type: Unspecified) and should ideally be updated to identify them as signal/contact pins.
Footprint check
  • Layout contains electrical pads 1 and 2, matching the two datasheet signal positions.
  • Layout also contains mounting pads/features 3, 4, and 5, which is consistent with the datasheet indicating screw/mounting features beyond the two electrical contacts.
  • Silkscreen/fab outline appears sized around the connector body envelope; observed outline extents are broadly in the range expected from the 35.31 mm width / 36.07 mm length datasheet dimensions.
Mismatches / issues flagged
  1. Project description appears truncated at PCB Thickness (Recommended) .0; datasheet value is 0.78–2.36 mm [0.031–0.093 in].
  2. Symbol pin descriptions are missing/generic; pins 1 and 2 should be described as contact/signal pins.
  3. Datasheet URL property points to an uploaded PDF asset rather than the TE product/drawing URL. This is not a functional mismatch because it appears to be the correct datasheet content, but using the TE official document delivery URL would improve traceability.
Overall result
The core part identity, signal pin count, schematic terminals, and footprint pad structure are consistent with the DT13-2P datasheet. Recommended cleanup is metadata/pin-description polish rather than a symbol or footprint structural correction.

  • Source data reviewed

  • Key datasheet specs

  • Project metadata check

  • Schematic symbol check

  • Footprint check

  • Mismatches / issues flagged

  • Overall result

Documents

  • Part Verification Report — DT13-2P

  • Part Verification: DT13-2P

  • DT13-2P Part Verification

Assets

DT13-2P-thumb.png

DT13-2P-thumb.png

DT13-2P-thumbThumbnail
DT13-2P

DT13-2P

DT13-2P Symbol.svgDefault
stp

DT13-2P

DT13-2P.stp3D Model
kicad_mod

DT13-2P

DT132P.kicad_modFootprint

DT13-2P

DT13-2P thumbnail
Connector Header Panel Mount, Through Hole, Right Angle 2 position 0.215" (5.46mm)
Deutsch DT 2-position connector DT13-2 style
DT13-2P is a 2-position, right-angle wire-to-board PCB header from the DEUTSCH DT Series by TE Connectivity. It is designed for rugged automotive, industrial, heavy equipment, and off-road applications where reliable power and signal connections are required. The connector features a sealed interface, through-hole solder termination, and a durable housing that withstands harsh environments, including vibration, moisture, and extreme temperatures.
Key Features: 2-position right-angle PCB header DEUTSCH DT sealed connector system Through-hole solder termination 5.46 mm (0.215 in) pitch Rated up to 13 A contact current Maximum operating voltage of 250 VAC/VDC Operating temperature range: -55°C to +125°C Nickel-plated contacts for corrosion resistance Suitable for both power and signal applications Rugged design for automotive and industrial environments
#CommonPartsLibrary #Connector #DT13-2P #TEConnectivity #DeutschDT #PCBHeader #WireToBoard #SealedConnector #AutomotiveConnector #IndustrialConnector #ThroughHole #RightAngleConnector #PowerConnector #SignalConnector

Properties

DT13-2P

Official datasheet/customer drawing: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=DT13-2P&DocType=Customer%20Drawing&DocLang=English&DocFormat=pdf&PartCntxt=DT13-2P

TE Connectivity Deutsch Connectors

Connectors

te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=DT13-2P&DocType=Customer%20Drawing&DocLang=English&DocFormat=pdf&PartCntxt=DT13-2P

J

PCB

parametric-v1

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls