Part Review and Datasheet Update
Worked for 4 mins 20 sec
Completed the part review and updated the Datasheet URL to the official Vicor PDF. The symbol pinout and 9-pad footprint broadly match the datasheet; key issues are a misleading project description (“3 20W” vs 26.67 A / 320 W), unspecified pin types/descriptions, and footprint drill/annular-ring dimensions not being visible in readback.
Full report:
part-review-vicor-dcm3623t75h13c2t00
Fix the description and pin metadata, then verify the footprint hole and annular-ring dimensions.
Thought for 5 sec
I’ll update the project description and terminal pin metadata, then inspect/export the footprint data to verify drill and annular-ring dimensions against the Vicor land pattern.
Worked for 7 mins
Completed: updated the project description, populated pin types/descriptions, and verified the footprint drills/annular rings from the raw KiCad footprint. The footprint dimensions match the Vicor datasheet: 2.03 mm drills with ~0.255/0.382 mm annular rings where required, and 1.52 mm signal drills with ~0.256 mm annular rings.
Detailed verification is in
footprint-verification-dcm3623t75h13c2t00.Review docs and export
Run final ERC/DRC
Update review doc
Export footprint file
Check part properties
Name
Pin #
Type
Part Type
Pin Description
Terminal Order
+IN
A1
Power In
Terminal
Positive input power terminal
+OUT_1
A2
Power Out
Terminal
Positive output power terminal
TR
B1
Input
Terminal
Trim control input; enables/disables trim functionality and adjusts output voltage when trim is active
-OUT_1
B2
Power Out
Terminal
Negative output power return terminal
EN
C1
Input
Terminal
Enable input; enables/disables the power supply, internally pulled up to VCC and referenced to -IN
+OUT_2
C2
Power Out
Terminal
Positive output power terminal
FT
D1
Output
Terminal
Fault monitoring output; active when powertrain stops due to fault or EN low
-OUT_2
D2
Power Out
Terminal
Negative output power return terminal
-IN
E1
Power In
Terminal
Negative input power terminal; reference for control pins
DCM3623T75H13C2T00
