Part Information Review and Update


I reviewed the part project and found the official datasheet URL I can set on the project:
Current part info vs datasheet

Table


FieldIn project nowFrom manufacturer/distributorsStatus
MPNCONN_025P_000C_1DB25-ST-1-BL-JSMismatch
Manufacturernot visibleAdam TechMissing
Part TypeConnectorsD-Sub standard connectorOK
Designator PrefixJConnectorOK
Datasheet URLnot confirmed present/populatedofficial PDF foundMissing
Footprint assetDB25-ST-1-BL-JS.kicad_modmatches MPN familyLikely OK
Pin count25 terminals25 positionsOK
Mounting stylenot visible in propertiesThrough-hole, straight PCB mountMissing metadata
Gender/typenot visible in propertiesReceptacle, female socketsMissing metadata
Key specs found
  • Manufacturer: Adam Tech
  • Exact MPN: DB25-ST-1-BL-JS
  • Description: 25-position female straight PCB-mount D-Sub receptacle
  • Mounting style: Through-hole
  • Current rating: 3 A
  • Operating temperature: -55°C to +85°C
Symbol / pin audit
  • The symbol currently has 25 terminal elements, numbered 1 through 25.
  • Each terminal’s Pin Number matches its designator, so the pin count and numbering look consistent with a 25-position connector.
  • All terminals currently have Pin Type: Unspecified.
  • I did not find datasheet-backed per-pin functional names/descriptions in the sources I could extract, so I can verify numbering, but not meaningful signal names beyond pin numbers.
  • Because the datasheet should be treated as the source of truth and pin data should not be guessed, leaving pin types/descriptions unforced is better than inventing them unless you want a convention like “Passive” applied across all pins
Footprint audit
  • The footprint asset name matches the manufacturer MPN family: DB25-ST-1-BL-JS.kicad_mod.
  • The layout contains 25 linked pads for the connector pins, which is consistent with the part.
  • Based on the imported footprint identity, the package selection appears plausibly correct for this connector.
  • I could not fully text-extract the PDF’s mechanical drawing in this session, so I have not dimensionally verified hole diameters, row spacing, or shell hardware locations against the drawing.
Mismatches and gaps to fix
  • MPN mismatch: project says CONN_025P_000C_1, while the official part is DB25-ST-1-BL-JS
  • Missing Manufacturer Name
  • Missing Datasheet URL
  • Missing richer package/mechanical metadata such as through-hole / straight / female / D-Sub
  • No datasheet-backed pin descriptions
  • All pin types are Unspecified; acceptable if the datasheet does not define electrical roles, but still incomplete metadata
For this kind of part-project audit, the correct flow is to set the datasheet URL first, then compare project properties and terminal elements against the datasheet, without guessing pin details
If you want, I can update the project property now with the official datasheet URL and then continue with the metadata cleanup next.

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified
9
9
Unspecified
10
10
Unspecified
11
11
Unspecified
12
12
Unspecified
13
13
Unspecified
14
14
Unspecified
15
15
Unspecified
16
16
Unspecified
17
17
Unspecified
18
18
Unspecified
19
19
Unspecified
20
20
Unspecified
21
21
Unspecified
22
22
Unspecified
23
23
Unspecified

DB25-ST-1-BL-JS