Part Review and Datasheet Verification

A

adrian95

Update the pin types/descriptions, normalize safe pin names, then run part review checks again.

flux

I’ll update the BNO085 terminal metadata from the datasheet, safely normalize the trailing-underscore pin names, then rerun the part review checks.

flux

Current terminals are still unspecified; I’m applying the datasheet-derived metadata now.

flux

Metadata and the three safe terminal names are updated; I’m running the part review checks now.

flux

Updated all 28 terminals with datasheet-derived Pin Type and short Pin Description values, and normalized ENV_SCL_, SA0/H_MOSI_, and H_SDA/H_MISO/TX_ by removing trailing underscores.
Open items:
  • Part review checks were queried after the update, but no component review check entries were returned for this part project.
  • I verified directly in the schematic that the updated pin metadata and normalized names are present.
Suggested next steps:
  1. If you want, I can also update the earlier bno085-part-review document with the completed fixes.
  2. Run a visual footprint/land-pattern check against the datasheet package drawing.
Update docs and verify
Update review document
Check footprint geometry
Run all checks
Improve part properties
Sign up to send

Files

Pins

Symbol

Layout

3D View

BNO085