Part Information Review and Updates


Part review summary
I checked the current part project against the existing datasheet URL in the project, so I did not need to search the web or update the datasheet property.
Metadata audit

Table


FieldIn projectDatasheet / source checkStatus
Manufacturer Part NumberBM23PF0.8-10DP-0.35V(51)Matches Hirose catalog entry✅ Match
Manufacturer NameHiroseDatasheet identifies Hirose / Hirose Electric✅ Match
Designator PrefixJAppropriate for a connector✅ Match
MountSurface MountDatasheet says Straight SMT✅ Match
Package or Case CodeTODatasheet indicates a 0.35 mm pitch, 0.8 mm stacking height, straight SMT board-to-board / board-to-FPC header❌ Mismatch
Project description"Board to Board & Mezzanine Connectors 10P HDR STRGHT SMT HYBRID W/POWER"Broadly consistent with the datasheet✅ Acceptable
Key specs from the datasheet

Table


SpecValue
Connector familyBM23PF Series
Exact variantBM23PF0.8-10DP-0.35V(51)
TypeHeader
Contact count10 electrical contacts
Extra pads4 mechanical hold-down / guide pads
Total SMT pads in footprint14
Pitch0.35 mm
Stacking height0.8 mm
Mounting styleStraight SMT
Rated current5 A on power contacts, 0.3 A on signal contacts
Rated voltage30 V AC/DC
Operating temperature-55 °C to 85 °C
Signal capabilitySupports USB 3.1 Gen.2 (10 Gbps) per series datasheet
Symbol cross-check

Table


CheckResult
Terminal count14 terminals present
Expected from datasheet10 contacts + 4 mechanical pads = 14 total
Numbering style1-10 plus MP1-MP4 is consistent with the datasheet structure
Per-pin descriptionsDatasheet does not provide named signal descriptions for each contact, only numbered contacts plus power-vs-signal classification
Current pin metadataAll terminals currently have Pin Type = Unspecified
Symbol findings
  • The terminal count is correct.
  • The presence of MP1-MP4 is consistent with the datasheet's 4 mechanical hold-down / guide pads.
  • The symbol is structurally correct, but the pin metadata is incomplete:
    • Contacts 1 and 10 should be identified as power contacts
    • Contacts 2-9 should be identified as signal contacts
    • MP1-MP4 are mechanical tabs, not normal signal contacts
Footprint cross-check

Table


CheckResult
Pad count in layout14 pads
Expected pad count14 pads
Mechanical pad presencePresent
Recommended PCB layout existenceDatasheet provides one for this exact variant
Footprint findings
  • The footprint pad count matches the datasheet.
  • The inclusion of 4 extra mechanical pads also matches the datasheet.
  • I could confirm the count and structure, but the layout tool output here did not expose pad dimensions/coordinates, so I could not fully verify exact pad geometry, spacing, or land sizes against the recommended PCB layout drawing from the datasheet.
Pin-description cross-check

Table


ItemResult
Named per-pin functions in datasheetNot provided
Can current terminal labels be verified against names?No, because the datasheet only gives numbering/classification, not signal names
Can power-vs-signal grouping be verified?Yes
Verified contact classification

Table


Contact groupDatasheet classification
1, 10Power contacts
2-9Signal contacts
MP1-MP4Mechanical hold-down / guide pads
Mismatches / issues to flag

Table


IssueSeverityNotes
Package or Case Code = TOHighThis is incorrect for this connector
All terminal Pin Type values are UnspecifiedMediumMetadata is incomplete
No short pin descriptions on terminalsLowDatasheet does not give full signal names, but power/signal/mechanical descriptions can still be added
Exact footprint geometry not fully verifiedMediumPad count matches, but dimensional verification needs pad geometry data
Recommended corrections

Table


Field / areaRecommended value
Package or Case CodeSomething like BM23PF 10P Header, 0.35 mm pitch, 0.8 mm stack height
Pin Type for contacts 1 and 10Mark as power-related
Pin Type for contacts 2-9Mark as signal/passive
Pin description for MP padsMark as mechanical hold-down / guide tab
Bottom line
  • MPN, manufacturer, mount, and overall description are fine
  • Package field is wrong
  • Symbol terminal count matches the datasheet
  • Footprint pad count matches the datasheet
  • Pin metadata is incomplete
  • No datasheet URL action was needed because one is already set
If you want, I can next update the incorrect package field and fill in the terminal pin types/descriptions for this part.
Fix all mismatches
Check footprints too
Focus on power parts
Save review notes

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified
9
9
Unspecified
10
10
Unspecified
MP1
11
Unspecified
MP2
13
Unspecified
MP3
12
Unspecified
MP4
14
Unspecified

BM23PF0.8-10DP-0.35V(51)