Part Information Review and Update
Thought for 5 mins 56 sec
Done — I reviewed the part against the datasheet and updated the project so the official datasheet URL is now set. I used the datasheet as the source of truth for metadata and pin audit, which is the right workflow for part-project verification
What I updated
- Set
Datasheet URLto the official Würth PDF - Added/fixed:
Manufacturer Name = Würth ElektronikPart Type = ConnectorOperating Voltage = 300 VMax Current = 20 AOperating Temperature = -40°C to +105°CImplementation Detailswith pitch, wave-solder note, housing/contact material
- Refreshed the part description to:
2-position 5.08 mm open vertical PCB header, 20 A, 300 VAC, WR-TBL Series 311
Table
| Field | Result |
|---|---|
| Manufacturer | Würth Elektronik |
| MPN | 691311500002 |
| Family | WR-TBL Series 311 |
| Description | 5.08 mm open vertical PCB header |
| Positions | 2 |
| Pitch | 5.08 mm |
| Orientation | Vertical |
| Current rating | 20 A |
| Voltage rating | 300 VAC |
| Operating temperature | -40°C to +105°C |
| Housing | PA66 |
| Flammability | UL94-V0 |
| Contacts | Brass, tin-plated solder tails |
| Process note | Wave solder only |
- Pin count: pass
- Datasheet indicates a 2-position part, and the project currently has 2 symbol pins and 2 PCB pads.
- Pin numbers: pass
- Project pins are numbered 1 and 2, which is consistent with a 2-position connector part.
- Pin descriptions: acceptable
- The datasheet does not provide distinct per-pin electrical functions; both pins are just connector contacts. So keeping both as Passive with the description "Terminal contact" is reasonable.
- No functional pin mismatch found
- I did not find evidence that pin 1 and pin 2 should have different names or types.
- Basic footprint consistency: partial pass
- The project has a footprint with 2 pads, which is consistent with the 2-position part.
- The datasheet confirms 5.08 mm pitch, so the intended footprint family is correct.
- Full mechanical verification: incomplete
- I could not conclusively verify pad drill size, pad diameter, or full body dimensions from the indexed project CAD assets. The project clearly includes KiCad/STEP assets, but their internal geometry was not exposed in the searchable project data, and the manufacturer’s 3D PDF drawing did not decode cleanly through the document extraction path.
Table
| Issue | Severity | Notes |
|---|---|---|
Project-level Designator Prefix = J, but symbol pins still show component-level prefix P | Minor | J is the better project-level prefix for a connector/header, and that matches the datasheet category guidance |
Project-level Part Type = Connector, but symbol primitives still show Part Type = Terminal | Minor | Likely a symbol-primitive vs project-metadata distinction, but it is still a metadata inconsistency worth noting |
No Package or Case Code set | Minor | I did not find a clear official package/case code in the datasheet text, so I did not invent one |
| Footprint dimensions not fully verified from CAD internals | Moderate | Pin count and family match, but drill/body geometry still needs direct CAD-level confirmation |
- Good: MPN, manufacturer, description, ratings, datasheet URL, and basic 2-pin/2-pad consistency are now in good shape.
- No obvious schematic-symbol pin mismatch was found.
- Remaining gap: the footprint is only partially verified because the searchable data did not expose the internal KiCad/STEP geometry.
If you want, I can next do one of these:
- normalize the symbol-level metadata so it aligns better with the connector classification
- do a deeper mechanical audit of the footprint using any directly accessible CAD text/drawing source you provide
Normalize connector metadata
Audit footprint geometry
Check other connectors
Thought
- Set Datasheet URL to "https://www.we-online.com/components/products/datasheet/691311500002.pdf"
- Set Manufacturer Name to "Würth Elektronik"
- Set Part Type to "Connector"
- Set Operating Voltage to "300"
- Set Max Current to "20"
- Set Operating Temperature to "-40°C to +105°C"
- Set Implementation Details to "- 5.08 mm pitch open vertical PCB header - Wave solder process only - PA66 housing, UL94-V0 - Brass contacts with tin-plated ..."
Thought
Updated to: "2-position 5.08 mm open vertical PCB header, 20 A, 300 VAC, WR-TBL Series 311"
Thought for 1 sec
- Set ~'s Pin Description to "Terminal contact"
- Set ~'s Pin Type to "Passive"
- Set ~'s Pin Description to "Terminal contact"
- Set ~'s Pin Type to "Passive"
