Completed the part review and saved the detailed findings in part-review-phoenix-contact-2961299.

I’ll update the relay metadata/pin descriptions, run electrical/layout checks, then inspect the footprint geometry again against the datasheet values.

Metadata updates are applied: project Part Type is now Relay, prefix is K, mount is Through Hole, and each terminal has a datasheet-based pin description. ERC/DRC is currently clean for open warnings/errors; I’m doing the final geometry pass now.

Fixed the relay metadata: Part Type is now Relay, mount is Through Hole, prefix is K, and all eight terminals now have datasheet-based pin descriptions with Passive pin type.

ERC/DRC/component-review checks returned no open errors or warnings. I updated part-review-phoenix-contact-2961299 with the details and flagged one remaining concern: the footprint silkscreen appears to use 29 mm as an in-plane length, while the datasheet lists 29 mm as height, so the footprint outline/pad drilling should be corrected or verified against the manufacturer drawing.