I’ll inspect the part metadata, look for an official datasheet if missing, update the Datasheet property if needed, then compare symbol/footprint/pins against the datasheet and report mismatches.

The official TE customer drawing is available and the part already has a datasheet source usable by the datasheet tool, so I’m proceeding with the symbol/footprint comparison.

Completed the part review for TE Connectivity 2286550-1. The 10-pad symbol/footprint count matches 6 connector positions plus 4 shield/mechanical pads, but pin descriptions and pin types are incomplete, and the footprint should still be dimension-checked against TE application spec 114-94381 before release.

Detailed findings are saved in the project document: part-review-results-te-connectivity-2286550-1.

I’ll update the terminal metadata now: assign passive connector pin types and add TE-based descriptions for the HSD contacts, MQS contacts, and shield/mechanical pads, then verify the schematic properties.

Updated and verified all 10 terminals. Pins 1–4 are now passive HSD signal contacts, pins 5–6 are passive MQS auxiliary contacts, and MH1–MH4 are passive shield/mechanical solder pads with TE-based descriptions.