adrian95 / 1730405

Loaded

0

0

Files

Schematic

PCB

Log InSign Up

Part Data Review and Validation

flux

1:36

Analyzing the schematic.

Analyzing the PCB layout.

Looking for "part number manufacturer package pin count description current rating voltage rating wire size torque flammability" in printed-circuit-board-terminal-mkds-25-3-508-1730405?type=pdf

Looking for "pin assignment contact numbering and dimensional drawing for MKDS 2,5/ 3-5,08 1730405" in printed-circuit-board-terminal-mkds-25-3-508-1730405?type=pdf

Looking for "mechanical dimensions pitch package dimensions drill size recommended PCB layout" in printed-circuit-board-terminal-mkds-25-3-508-1730405?type=pdf

Looking for "product description and technical data table" in printed-circuit-board-terminal-mkds-25-3-508-1730405?type=pdf

Inspecting uploaded files.

Searching for project data.

I reviewed the part project against the existing Phoenix Contact datasheet URL already set on the project, so no datasheet-property update was needed. For this kind of part-project audit, the key checks are exact pin-count matching and treating the datasheet as the source of truth for pin numbering and metadata
What I found Existing project metadata
Current project-level info:
  • Description: Fixed Terminal Blocks MKDS 2 5/ 3-5 08
  • Manufacturer Name: Phoenix Contact
  • Manufacturer Part Number: 1730405
  • Designator Prefix: J
  • Datasheet URL: already set to the official Phoenix Contact PDF page
Datasheet cross-check
From the official datasheet/product PDF I extracted:
  • Part: Phoenix Contact 1730405
  • Series / family: MKDS 2,5
  • Description: printed circuit board terminal / PCB terminal block
  • Positions / pin count: 3
  • Pitch: 5.08 mm
  • Current rating: 24 A
  • Voltage rating: 400 V nominal
    • also listed: 400 V (III/2), 250 V (III/3), 630 V (II/2)
  • Connection method: screw connection with tension sleeve
  • Wire size: 0.14 mm² to 2.5 mm², AWG 26 to 14
  • Torque: 0.5 to 0.6 Nm
  • Housing material / flammability: PA, UL 94 V0
  • Operating temperature: -40 °C to +105 °C
  • Mechanical: width 16.42 mm, height 21.7 mm, length 11.92 mm, solder pin length 3.7 mm, pin dimensions 1.1 × 0.8 mm, recommended PCB hole diameter 1.4 mm
Symbol audit Good
  • Pin count matches: project has 3 terminal symbols, which matches the datasheet’s 3 positions.
  • Pin numbers match: project terminals are numbered 1, 2, 3, matching the datasheet/contact numbering.
Mismatches / issues
  • Pin names/designators are just 1, 2, 3.
    For a terminal block this is acceptable electrically, but it’s minimal. If you want richer part quality, the terminal labels could stay numeric, but each should have a Pin Description like:
    • Pin 1: Terminal position 1
    • Pin 2: Terminal position 2
    • Pin 3: Terminal position 3
  • Pin Type is Unspecified on all 3 pins.
    For a connector/terminal part, these should not stay unspecified. The part-project sync guidance explicitly calls out setting pin types and descriptions during verification
  • No pin descriptions are present.
    This is the main schematic-symbol metadata gap.
Footprint audit Good
  • The layout contains 3 pads, matching the 3-position datasheet part.
  • Pad numbering is 1, 2, 3, consistent with the symbol and datasheet numbering.
  • Based on the project footprint structure, the footprint is at least topologically correct for a 3-pin terminal block.
Could not fully verify from available geometry output
I could confirm the footprint has the right pad count and numbering, but the current layout readout did not expose exact pad geometry/coordinates, so I could not numerically confirm:
  • 5.08 mm center-to-center pitch
  • 1.4 mm drill diameter
  • exact body-outline dimensions vs datasheet drawing
So the footprint status is:
  • Logical match: yes
  • Full mechanical verification: partially incomplete with the data exposed in this session
Description / property audit Good
  • MPN and Manufacturer are correct.
  • Designator prefix J is appropriate for a connector/terminal block.
  • Datasheet link already points to the official Phoenix Contact source, which is the correct canonical source to keep on the part
Missing / weak metadata
Compared with the datasheet, the project is missing several useful part properties:
  • Part Type: should be something like Connector
  • Package or Case Code: should reflect the connector family/package style, e.g. MKDS 2,5/ 3-5,08
  • Max Current: 24 A
  • Operating Temperature: -40°C to +105°C
  • Potentially Implementation Details for:
    • screw connection with tension sleeve
    • conductor range 0.14–2.5 mm²
    • tightening torque 0.5–0.6 Nm
    • PCB hole diameter 1.4 mm
The description is also technically understandable, but it could be improved to a clearer library-facing description. The part-project sync guidance recommends descriptions that start with what the part does, then key specs
A better description would be:
  • “3-position PCB terminal block, 5.08 mm pitch, 24 A, 400 V, screw clamp”
Summary of mismatches / flags Confirmed matches
  • MPN matches datasheet
  • Manufacturer matches datasheet
  • Pin count matches datasheet
  • Pin numbering matches datasheet
  • Datasheet URL already set and official
  • Designator prefix is appropriate
Confirmed issues
  1. All 3 pins have Pin Type = Unspecified
  2. No Pin Description properties
  3. Description is present but not ideal for a reusable part listing
  4. Important project metadata is missing:
    • Part Type
    • Package/Case Code
    • Max Current
    • Operating Temperature
    • optional implementation/mechanical details
Not fully verified
  1. Footprint mechanical dimensions
    I could not fully confirm drill/pad geometry and exact 5.08 mm pitch from the exposed layout data, only that the footprint has 3 correctly numbered pads.
Recommended next fixes
  1. Set Part Type = Connector
  2. Improve the project description
  3. Add:
    • Package or Case Code = MKDS 2,5/ 3-5,08
    • Max Current = 24 A
    • Operating Temperature = -40°C to +105°C
  4. Set each terminal’s:
    • Pin Type
    • Pin Description
If you want, I can apply those metadata and pin-property fixes now.
Fix all mismatches
Review decoupling issues
Save review notes
3 days
​
Sign up to send

Reviews

  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.8k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M

1730405

1730405 thumbnail
3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block

Properties

1730405

Phoenix Contact

Connector

phoenixcontact.com/en-us/products/printed-circuit-board-terminal-mkds-25-3-508-1730405?type=pdf

J

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls

Welcome 👋

Flux accelerates your PCB design with AI.

Create your account to start using this component and bring your ideas to life.

      Introducing AI Placement!
      AI Placement Demo

      AI-Powered Component Placement

      Let AI place your components intelligently. AI Placement analyzes your schematic and positions components for optimal routing, signal integrity, and board density.

      From Schematic to Layout in Seconds

      Skip the tedious manual placement. AI Placement generates a starting layout you can refine, saving hours of repetitive work on every new design.

      Works With Auto-Layout

      Pair AI Placement with Auto-Layout for a complete AI-driven PCB design flow — from component placement through trace routing, all with one click.

      Try it