Part Review and Datasheet Verification

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll review the part metadata and existing symbol/footprint, find and set the official datasheet URL if missing, then cross-check pins and summarize any mismatches.

flux

The datasheet URL was already present, so I’m using that official Phoenix Contact PDF for the cross-check. I found the core symbol pin count matches, and I’m recording the detailed review in a project document.

flux

Review complete. The Datasheet URL was already set to the official Phoenix Contact PDF, so no update was needed.
I found no blocking mismatch for MPN, manufacturer, description, pin count, pin numbering, or basic footprint outline. I flagged sparse pin descriptions/pin type metadata and noted that the returned layout data did not expose drill/pitch values, so the 1.0 mm hole and 3.5 mm pad pitch should be confirmed in the footprint editor.
Detailed report: Part Review: Phoenix Contact 1727016
Fix metadata and verify
Fix pin metadata
Verify footprint dimensions
Run part DRC
Check manufacturing output
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
1
1
Passive
Left
Terminal position 1
2
2
Passive
Left
Terminal position 2
3
3
Passive
Left
Terminal position 3

1727016