Part Information Review and Validation

flux

I reviewed the part project and cross-checked it against the currently linked Molex PDF and the project data.
What I found Project metadata

Table

FieldCurrent valueStatus
Manufacturer Part Number0430451428OK
Manufacturer NameMolexOK
Part TypeConnectorsOK
MountPCBOK
Designator PrefixJOK
Datasheet URLSet to Molex PDFPresent
Package / Case CodeMissingNeeds review
Per the part-project sync guidance, the datasheet URL should already exist before pin/metadata audit, and properties should only be updated if missing or incorrect. Exact property names matter to avoid duplicates.
Datasheet / source quality check
The current Datasheet URL is already set, so I did not search for and replace it.
However, the linked Molex PDF appears to describe a 43045 family drawing and the extracted text identifies it as a Micro-Fit 3.0 dual-row right-angle through-hole header assembly, while your project description says vertical header ... with PCB polarizing peg. The official Molex product page for 0430451428 only says limited information is available and does not clearly restate vertical/right-angle on-page.
Key specs extracted from the linked Molex document

Table

ItemValue
Series43045
Circuits14
Rows2
Pitch3.00 mm
Mate series43025 receptacle
Recommended PCB thickness1.57 mm
Contact hole diameter1.02 ± 0.05 mm
Row spacing4.32 ± 0.08 mm
14-circuit size A24.65 mm
14-circuit size B18.00 mm
14-circuit size C13.70 mm
Contact materialBrass alloy
Housing materialGlass-filled LCP, UL94V-0, black
The sync workflow requires using the datasheet as the single source of truth and matching pin count exactly.
Schematic symbol check
Current symbol:
  • 14 terminals present
  • Pins numbered 1-7 on the left, 8-14 on the right
  • All terminals have Pin Number
  • All terminals have Pin Type = Unspecified
  • No real pin descriptions are populated beyond the numeric labels
Cross-check against datasheet:
  • The linked document indicates 14 connector circuits numbered 1 through 14
  • No special-function pins, NC pins, or asymmetrical electrical functions were identified
  • All positions appear to be equivalent connector contacts
Footprint check
Current layout data shows:
  • 14 electrical pads numbered 1-14
  • 2 additional pads/nodes named MH1 and MH2
  • Silkscreen/fab outline present
Mismatches / issues flagged

Table

AreaFindingSeverity
Description vs linked datasheetProject description says vertical; linked Molex PDF extraction says right-angleHigh
Polarizing/mechanical featuresDescription says PCB polarizing peg; footprint appears to include MH1/MH2 mechanical features, which may not match the exact part wordingMedium
Datasheet specificityLinked PDF may be a family drawing, not a clearly exact single-MPN datasheet for 0430451428High
Package / Case Code propertyMissingMedium
Pin Type fieldsAll set to Unspecified even though connector contacts could be set consistentlyLow
Pin descriptionsMissingLow
Bottom line
  • The part is mostly structurally complete: 14 symbol pins and 14 numbered footprint pads are present.
  • The biggest problem is datasheet ambiguity: the currently linked Molex PDF appears inconsistent with your project description.
  • Because of that ambiguity, I cannot confidently certify whether the current footprint is correct for the exact MPN 0430451428, especially the vertical vs right-angle orientation and the mechanical peg / mount feature details.
  • I also found metadata gaps: Package / Case Code is missing, and the symbol lacks useful pin descriptions.
Recommended next steps
  1. Confirm the exact official mechanical drawing / datasheet for 0430451428.
  2. Then verify:
    • orientation: vertical vs right-angle
    • mechanical features: polarizing peg vs mounting holes/posts
    • exact footprint hole pattern
  3. After that, update:
    • Package or Case Code
    • pin descriptions
    • pin types, if you want the symbol to be cleaner
If you want, I can do the next pass focused on resolving the exact Molex document ambiguity and then give you a precise list of what should be changed in the symbol and footprint.
Resolve datasheet ambiguity
Check mechanical details
Fix metadata fields
Sign up to send

Files

Pins

Symbol

Layout

Preview

Name
Pin #
Type
Part Type
Terminal Order
1
1
Unspecified
Terminal
2
2
Unspecified
Terminal
3
3
Unspecified
Terminal
4
4
Unspecified
Terminal
5
5
Unspecified
Terminal
6
6
Unspecified
Terminal
7
7
Unspecified
Terminal
8
8
Unspecified
Terminal
9
9
Unspecified
Terminal
10
10
Unspecified
Terminal
11
11
Unspecified
Terminal
12
12
Unspecified
Terminal
13
13
Unspecified
Terminal
14
14
Unspecified
Terminal

0430451428

0430451428 thumbnail