Temperature and Humidity Sensor Node Design

flux

2:20

Accessing knowledge base.

Planning project components.

I’ll create your low‑power USB‑C Wi‑Fi + BLE temperature/humidity sensor node with robust protections.

Planned steps:

Add core blocks: dual‑radio MCU (Wi‑Fi b/g/n + BLE 5.x), digital I2C T/RH sensor, USB‑C receptacle (sink), low‑Iq 5V→3.3V buck, protection IC (reverse/OVP/UVLO/OCP), TVS/EMI parts, programmer header, user LED/button.
Power/protection: CC resistors for USB‑C sink; input filter + TVS; eFuse‑class protection ahead of buck; sensor/LED power gating for sub‑5 µA sleep; full decoupling per datasheets.
Nets: I2C with pull‑ups, interrupts, UART/programming; test points for 5 V/3.3 V/GND.
Layout: antenna keepout for 2.4 GHz; isolate sensor from heat; low‑cap USB data‑line ESD (<1 pF per line); size connector/power traces for up to 3 A.
Reviews: ERC/DRC, availability, footprints; finalize BOM.

Click Start on the plan bar to proceed, or tell me changes you want (e.g., sensor accuracy, MCU vendor, size constraints).

Plan

#Goal

Design a low-power Wi‑Fi + BLE temperature/humidity sensor node for consumer use. The node will be USB‑C powered (5 V) with a proper sink configuration and robust power-path protection (reverse polarity, OVP, UVLO, OCP). It will include a dual‑radio 2.4 GHz MCU that supports Wi‑Fi (802.11 b/g/n) and BLE 5.x, a digital temperature/humidity sensor via I²C, and a low Iq buck converter for 5V-to-3.3V conversion. Emphasis is on low standby current, effective RF/ESD measures, and support for input sources ranging from 0.5–3 A.

#Implementation plan

Key Components Selection and Addition
1. Select and add a dual‑radio MCU with Wi‑Fi (802.11 b/g/n) and BLE 5.x support.
2. Select and add a digital temperature/humidity sensor with I²C interface.
3. Select and add a low Iq buck converter for 5V-to-3.3V regulation.
Power Management and Protection
1. Add a USB‑C receptacle configured for sink mode with proper CC resistor values.
2. Add input filters and TVS/EMI protection for the VBUS as well as for the D+/D- lines.
3. Add a robust power protection circuit (e.g., an eFuse or dedicated protection IC) that implements reverse polarity, over-voltage (OVP), undervoltage lockout (UVLO), and overcurrent (OCP) protection ahead of the buck converter.
4. Set trace widths in the design to manage currents up to 3 A.
Connectivity and System Integration
1. Connect the MCU to the temperature/humidity sensor via I²C with appropriate pull-ups.
2. Expose programming header and basic user I/O (e.g., status LED and a push button) on the schematic.
3. Add necessary decoupling capacitors and ensure adherence to manufacturer datasheets for each component.
RF and Layout Considerations
1. Reserve an antenna keepout zone and plan for proper RF routing for the 2.4 GHz dual‑radio functionality.
2. Implement good ESD practices across the design, particularly on USB and RF sections.
3. Validate that the design meets low standby current goals and supports adequate current sourcing (0.5–3 A) from the USB‑C power supply.
Review and Finalization
1. Run ERC/DRC to verify the schematic covers all specified protection and connectivity aspects.
2. Validate that all component footprints and decoupling strategies are in place and meet the low power and RF requirements.
3. Consolidate the BOM and prepare the design for PCB layout and manufacturing.

#Success criteria

The schematic integrates a dual‑radio MCU, digital T/RH sensor, and low Iq buck converter with a complete and robust USB‑C power input and protection scheme.
All specified protections (reverse polarity, OVP, UVLO, OCP) are implemented before voltage conversion.
The RF layout incorporates an antenna keepout zone and follows ESD best practices for 2.4 GHz performance.
The design supports power sourcing from 0.5–3 A while ensuring low standby current and overall system efficiency.

Pick MCU family

Sensor choice details

Protection IC selection

Power budget question

Mechanical and antenna constraints

146 days

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

Vocal Chocolate Neuralizer

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

See prices from popular manufacturers for your project.

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

0xl0r3nz0 / Vocal Chocolate Neuralizer

Schematic