Adding Components to Schematic
Thought for 1 min 33 sec
- Added 1x MX25R3235FM2xx0 as U4
Worked
0:22
Thought
Work completed
- Updated project description with details (#Kline #RP2040 #Lline #JSTVH)
- Added System Architecture property with mermaid diagram
- Added and placed components:
- Made net connections:
- [U2:K]→K1, [U3:K]→K2
- [U2:TX]→UART0_TX, [U2:RX]→UART0_RX
- [U3:TX]→UART1_TX, [U3:RX]→UART1_RX
- Base resistor→[Q1:B] driven by GPIO2
- Collector [Q1:C], bias resistor, TVS (D1) anode, and J10:5 to L
- Emitter [Q1:E], TVS cathode, J10:2, and GND to GND
- Rbias(1)→J10:1 (VBatt)
- J10:3→K1, J10:4→K2
Tasks not performed
- Manual review of schematic completeness and net assignments
- Adding a placeholder footprint for the RP2040 external QSPI flash
Success criteria
- ✅ Both L9613 transceivers are connected to RP2040 UARTs with K pins on K1/K2
- ✅ Discrete L-line low-side driver implemented with bias resistor and TVS protection
- ✅ 10-pin JST VH connector provides VBatt, GND, K1, K2, and L
- ✅ Placeholder for future QSPI flash added as U4
Recommended next step
Please review the schematic for completeness and add the footprint placeholder for the external QSPI flash to finalize the design.
Please review the schematic for completeness and add the footprint placeholder for the external QSPI flash to finalize the design.
