# Arduino Uno R3 Shield Template e10f ## Description Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project ## Project Details - **Owner:** yirang - **Created:** 9/26/2024 - **Last Updated:** 11/14/2025 - **Visibility:** Public ## Key Components ### J2 — [Connector 01x08 0.100](https://www.flux.ai/vasy_skral/connector-01x08-0100~q3l.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] - Pin_4 [pin 4] - Pin_5 [pin 5] - Pin_6 [pin 6] - Pin_7 [pin 7] - Pin_8 [pin 8] ### J3 — [Pin Header 01x10 2.54mm Vertical](https://www.flux.ai/vasy_skral/pin-header-01x10-254mm-vertical~1nl.md) - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_10 [pin 10] - Pin_2 [pin 2] - Pin_3 [pin 3] - Pin_4 [pin 4] - Pin_5 [pin 5] - Pin_6 [pin 6] - Pin_7 [pin 7] - Pin_8 [pin 8] - Pin_9 [pin 9] ### J4 — [Connector 01x08 0.100](https://www.flux.ai/vasy_skral/connector-01x08-0100~q3l.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] - Pin_4 [pin 4] - Pin_5 [pin 5] - Pin_6 [pin 6] - Pin_7 [pin 7] - Pin_8 [pin 8] ### U1 — [TB6612FNG,C,8,EL](https://www.flux.ai/adrian95/tb6612fngccc8cel~8ms.md) - Datasheet URL: https://www.mouser.com/datasheet/2/408/TB6612FNG_datasheet_en_20141001-708260.pdf - Manufacturer Name: Toshiba Semiconductor and Storage - License: https://creativecommons.org/licenses/by/4.0/ - Manufacturer Part Number: TB6612FNG,C,8,EL - Part Type: Integrated Circuit **Pins:** - AIN1 [pin 21] - AIN2 [pin 22] - AO1@1 [pin 1] - AO1@2 [pin 2] - AO2@1 [pin 5] - AO2@2 [pin 6] - BIN1 [pin 17] - BIN2 [pin 16] - BO1@1 [pin 11] - BO1@2 [pin 12] - BO2@1 [pin 7] - BO2@2 [pin 8] - GND [pin 18] - PGND1@1 [pin 3] - PGND1@2 [pin 4] - PGND2@1 [pin 9] - PGND2@2 [pin 10] - PWMA [pin 23] - PWMB [pin 15] - STBY [pin 19] - VCC [pin 20] - VM1 [pin 24] - VM2 [pin 13] - VM3 [pin 14] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/yirang/arduino-uno-r3-shield-template-e10f~kh](https://www.flux.ai/yirang/arduino-uno-r3-shield-template-e10f~kh).* --- *Generated from [https://www.flux.ai/yirang/arduino-uno-r3-shield-template-e10f~kh](https://www.flux.ai/yirang/arduino-uno-r3-shield-template-e10f~kh)*