PCB Import Help
Worked for 14 mins 18 sec
I’ve matched the main ICs/connectors and am adding the schematic in functional groups now. A few LEDs/fuse parts only have close library alternatives, so I’ll preserve the original MPN/LCSC metadata on those components and flag them after verification.
Worked for 8 mins 16 sec
The schematic BOM is now in Flux with 53 components added and source metadata preserved. I’m moving to connectivity next, starting with rails, USB-C, SD card, CAN, buttons, and LED nets.
Worked for 48 mins 50 sec
Created a project doc
Reconstruction is in Flux: I added the YachtWave Rev B schematic BOM, recreated the major power/USB/SD/CAN/LED/switch nets, marked unused ESP32/USB-C pins as no-connect, and saved details in KiCad Schematic Reconstruction Report.
Open items:
- ERC still has 9 floating-pin warnings in the power-input/filter/jumper area:
C13,C5,FL1,L1,JP1, andR10. - A few exact parts were unavailable, so closest library alternatives were used and flagged in the report.
Suggested next steps:
- Do one focused cleanup pass on the remaining 9 floating pins.
- Assign Flux-native footprints/packages to generic passives.
- Visually organize the schematic into readable functional blocks.
- Rebuild PCB placement/layout from the KiCad PCB reference.
Clean, organize, verify
Fix floating pins
Organize schematic
Assign passive footprints
Run full ERC
