Flex Board Design Assistance
Thought for 15 sec
I found the uploaded schematic asset: PropSensorFlex.kicad_sch.
I can use it next as the reference for this design. Suggested next steps:
- Import/rebuild the schematic into Flux from that KiCad schematic.
- Compare it against the project spec and flag mismatches.
- Then complete the missing ADS1232 GPIO and bridge/load-cell connector details.
The schematic has the complete pinout
Thought for 7 sec
Great — I’ll treat PropSensorFlex.kicad_sch as the source of truth for the complete pinout and compare it against the current project spec before building the Flux schematic.
Thought for 2 mins 1 sec
Got it — I’ll use PropSensorFlex.kicad_sch as the complete pinout source.
I can see the asset is attached, but Flux hasn’t exposed its internal KiCad contents to me yet, so I can’t extract the exact nets/pins directly from it in this chat. Next best step: either import/rebuild the schematic from that KiCad file in Flux, or paste/upload the pinout text/netlist and I’ll wire the Flux schematic from it.
Import, review, wire
Import KiCad schematic
Compare to spec
Extract netlist help
Start schematic build
No schematic yet
Talk to Flux to get started.
No layout yet
When components get added to the schematic, they'll show up here.