I found the uploaded schematic asset: PropSensorFlex.kicad_sch.

I can use it next as the reference for this design. Suggested next steps:

Great — I’ll treat PropSensorFlex.kicad_sch as the source of truth for the complete pinout and compare it against the current project spec before building the Flux schematic.

Got it — I’ll use PropSensorFlex.kicad_sch as the complete pinout source.

I can see the asset is attached, but Flux hasn’t exposed its internal KiCad contents to me yet, so I can’t extract the exact nets/pins directly from it in this chat. Next best step: either import/rebuild the schematic from that KiCad file in Flux, or paste/upload the pinout text/netlist and I’ll wire the Flux schematic from it.