But the resistance value used is 330 Ohms, meaning the actual current will be:
I=RV=330Ω3V≈9.09mA
This is a safe value for the LED.
Summary
This simple circuit lights up an LED when powered with a 5V source, with a current-limiting resistor to protect the LED. The project uses standard components available from various distributors.
Do you have any specific questions or need further details?
The project consists of a few components: two resistors, an LED, and a power source. These components are arranged in a simple circuit to power the LED.
The positive terminal (ANODE) of the power supply (V1) is connected to GND (which is actually listed as the ANODE pin name, but is connected to the ground).
The negative terminal (CATHODE) is connected to [Net 3](Net 3), which includes the first resistor R1.
When the power supply V1 provides 5V, the currents flow through R1 and R2, setting up a voltage that powers LED1. Resistors R1 and R2 limit the current flowing through the LED to ensure it operates within safe parameters.
Is there anything specific you would like to delve deeper into?
welson20
copilot
-
Resistor (R1)
- Designator: R1
- Manufacturer Part Number (MPN): CFR-12JB-52-330R
- Value: 330 Ohms
- Manufacturer: Yageo
- Pins:
- 1 (P1)
- 2 (P2)
-
LED (LED1)
- Designator: LED1
- Manufacturer Part Number (MPN): 598-8070-107F
- Forward Voltage: 2V
- Current: 20mA
- Manufacturer: Dialight
- Pins:
- Anode (A)
- Cathode (K)
-
Voltage Source (V1)
- Designator: V1
- Voltage: 5V
- Pins:
- Anode (ANODE)
- Cathode (CATHODE)
Net Connections- Net 1 connects:
- R1:P2 to LED1:A
- GND connects:
- LED1:K to V1:ANODE
- Net 3 connects:
- R1:P1 to V1:CATHODE
Circuit Description- The 5V voltage source V1 provides power to the circuit.
- The resistor R1 limits the current flowing through the LED to protect it from damage.
- The LED LED1 emits light when current flows through it.
Calculations