# Rev.17 ERC Blocker Register
## Checkpoint and integrity statement
- **Current verified ERC result (2026-08-13):** ERC is **not clean**.
- **Focused pass before → after:** floating pins **1372 → 1372**; missing power **0 → 0**; single-pin nets **27 → 27**.
- **Current total:** **1399 findings** across these three categories. The increase from the historical ~755 baseline is dominated by staged/disconnected compute hardware now included in ERC: `U30` RK3568 (560), legacy `U1` quarantine (364), `U27` RK809-5 (54), and `U12` eMMC (33).
- **Safe fixes in this pass:** 0; no authoritative endpoint remained that could be connected without guessing. The earlier verified `U27:DVDD` repair remains retained.
- No mandatory pin was silenced with a false no-connect, guessed compute/PMIC connection, or fake power source. See **Focused ERC remediation follow-up — 2026-08-13** for the exact classification and timestamps.
## Exact single-pin-net register (31)
The following is the complete fresh Single Pin Nets result at commit `a1a16f12`, preserving net and endpoint exactly:
1. `NFC_VEN` — `U24:VEN`
2. `MCU_JTAG_MOD` — `R1006:P1`
3. `BLE_WAKE` — `U23:P0.23`
4. `BLE_IRQ` — `U23:P0.24`
5. `NFC_IRQ` — `U24:IRQ`
6. `BLE_UART7_TX` — `U23:P0.20`
7. `BLE_RESET_N` — `U23:~RESET`
8. `MAX86176_TRIG` — `U5:TRIG`
9. `DCDC_LP_SW` — `L1001:P1`
10. `BOOT_MODE0` — `R1:P1`
11. `AD5940_LPSPI6_MISO` — `U4:MISO`
12. `MCU_ONOFF` — `R1003:P2`
13. `DCDC_LN_SW` — `L1001:P2`
14. `NFC_WAKE_REQ` — `U24:WKUP_REQ`
15. `AD5940_LPSPI6_SCK` — `U4:SCLK`
16. `MCU_SWDCLK_JTAG_TCK` — `J21:SWDCLK/TCK`
17. `SENSOR_LINK_EN` — `U21:ON`
18. `MAX86176_INT2` — `U5:INT2`
19. `AD5940_INT_N` — `U4:GPIO0`
20. `BLE_UART7_RX` — `U23:P0.22`
21. `MAX86176_INT1` — `U5:INT1`
22. `VDD_LPSR_DIG` — `C41:P1`
23. `MCU_SWDIO_JTAG_TMS` — `J21:SWDIO/TMS`
24. `MCU_JTAG_TDI` — `J21:NC/TDI`
25. `VDD_SNVS_DIG` — `C46:P1`
26. `AD5940_LPSPI6_MOSI` — `U4:MOSI`
27. `VDD_LPSR_ANA` — `C45:P1`
28. `SENSOR_LINK_INT` — `D7:IO3`
29. `BOOT_MODE1` — `R1004:P2`
30. `MCU_SWO_JTAG_TDO` — `J21:SWO/TDO`
31. `VDD_SNVS_ANA` — `C48:P1`
## Categorized exact blockers
### U1 — MIMX8MM5DVTLZAA processor
- DDR endpoints (`DRAM_AC00..DRAM_AC38`, `DRAM_DQ00..DRAM_DQ31`, `DRAM_DM0..DRAM_DM3`, `DRAM_DQS0..3`, `DRAM_ZN`, `DRAM_VREF`, `DRAM_RESET_N`, `DRAM_ALERT_N`) cannot be assigned safely without the editable NXP EVK netlist/routing tables and a verified Micron LPDDR4 map.
- Muxable/control endpoints remain unresolved pending completed IOMUX allocation, including the exact single-pin contracts `BOOT_MODE0`, `BOOT_MODE1`, `MCU_ONOFF`, `MCU_JTAG_MOD`, `MCU_SWDCLK_JTAG_TCK`, `MCU_SWDIO_JTAG_TMS`, `MCU_JTAG_TDI`, and `MCU_SWO_JTAG_TDO`.
- Processor power/clock/boot/debug support and BD71847 sequencing/handshake remain incomplete. Coordinate-style/duplicate symbol naming can report ball coordinates instead of electrical functions and must not be guessed.
### U3 — MT53D512M32D2DS-053 WT:D LPDDR4
- Functional wiring is blocked because the available 200-ball part/map is not verified as a functional Micron ball map with proven package geometry.
- All DQ/DQS/CA/CK/CKE/CS/ODT/RESET/ZQ, `VDD1`, `VDD2`, `VDDQ`, and `VSS` assignments require the authoritative map and NXP routing tables. `DNU`/`NC` status must be source-proven rather than silenced.
### U12 — MTFC16GAPALBH-IT eMMC
- `DAT0..DAT7`, `CMD`, `CLK`, `DS`, and `RST_N` await the completed i.MX8MM USDHC/IOMUX allocation.
- `VCC`, `VCCQ`, `VDDI`, and `VSF1/2/3/4/6/7` require a controlled eMMC rail/VSF source and source-backed ball-function audit. Grounds already connected do not clear these rail blockers.
### U22 — TXS0108ENMER translator
- `A1..A8` and `B1..B8` remain deliberately open until the i.MX8MM mux/channel allocation proves the BG95 UART/control channel assignment. They are not to be guessed or marked no-connect.
### U2 — BG95 modem
- Exact unresolved endpoints include `USB_VBUS` and `GNSS_LAN_EN`; MAIN UART/control/reset/PWRKEY and USB host-side destinations remain dependent on completed SoC IOMUX and verified translator/channel mapping.
- RF/control completion also depends on verified LTE/GNSS antenna and enclosure endpoints.
### E3 — 2118900-1 GNSS antenna connector
- Fresh floating endpoints are `E3:1`, `E3:2`, `E3:S1`, and `E3:S2`.
- The indexed connector evidence did not prove which contact is RF feed, ground, or mechanical/shield. Connection is blocked until the exact contact assignment is verified.
### U23 — nRF5340 BLE hub
- Exact open contracts are `BLE_WAKE`→`U23:P0.23`, `BLE_IRQ`→`U23:P0.24`, `BLE_UART7_TX`→`U23:P0.20`, `BLE_UART7_RX`→`U23:P0.22`, and `BLE_RESET_N`→`U23:~RESET`.
- SoC-side UART/wake/IRQ/reset endpoints require completed IOMUX allocation and verified control ownership.
### U24 — PN7160 NFC controller
- Exact open contracts are `NFC_VEN`→`U24:VEN`, `NFC_IRQ`→`U24:IRQ`, and `NFC_WAKE_REQ`→`U24:WKUP_REQ`.
- SoC-side enable/interrupt/wake endpoints require completed IOMUX allocation; NFC antenna/control closure requires verified RF/control endpoints.
### U9 — BQ25895 charger
- Fresh exact missing-power finding: `U9:VBUS` on `WIRELESS_5V_IN` is not driven by an ERC-recognized power source.
- This must be resolved by verifying the real wireless/dock source and power-path ownership, not by adding a fake source.
### U19 — BQ25570 solar harvester
- Fresh exact missing-power findings: `U19:VBAT_OK` on `SOLAR_STORAGE_PGOOD`, `U19:VBAT_OV` on `SOLAR_OV_SENSE`, and `U19:VBAT` on `SOLAR_STORAGE_RESERVOIR`.
- These require source-backed harvester/storage and control semantics; they must not be suppressed by invented drive sources.
### Remaining peripheral endpoints
- AFE/SPI: `MAX86176_TRIG`, `MAX86176_INT1`, `MAX86176_INT2`, `AD5940_LPSPI6_MISO`, `AD5940_LPSPI6_SCK`, `AD5940_LPSPI6_MOSI`, `AD5940_INT_N`.
- Sensor link: `SENSOR_LINK_EN`, `SENSOR_LINK_INT`.
- Processor low-power rails: `VDD_LPSR_DIG`, `VDD_SNVS_DIG`, `VDD_LPSR_ANA`, `VDD_SNVS_ANA` currently terminate only at `C41:P1`, `C46:P1`, `C45:P1`, and `C48:P1` respectively.
- PMIC switching network: `DCDC_LP_SW`→`L1001:P1` and `DCDC_LN_SW`→`L1001:P2` remain single-ended until the complete BD71847 external rail network is defined.
- Dock/debug, RF, and control destinations must be verified before connecting any remaining endpoint.
## Dependencies required to proceed
1. **NXP 8MMINILPD4-EVK editable schematic/netlist**, including DDR routing tables—not only the Hardware User Guide.
2. **Completed i.MX8MM IOMUX allocation** for USDHC, UART, wake/IRQ/reset, debug, NFC, BLE, modem, sensor, and AFE contracts.
3. **Functional Micron LPDDR4 ball map/package geometry** for the exact 200-ball device.
4. **Controlled eMMC rail/VSF source** and source-backed ball-function audit.
5. **Completed BD71847 external rail network**, including inductors, feedback, decoupling, sequencing, and handshake.
6. **Verified dock/RF/control endpoints**, including E3 contact assignment and antenna/enclosure-dependent feeds/tuning.
## Release statement
ERC remains blocked and is not clean. The recorded reduction is exactly one verified electrical repair; it is not evidence of overall schematic completion. Mandatory pins remain visible as blockers until authoritative dependencies are supplied.
## Bounded retained-schematic remediation pass — 2026-08-04 15:23 UTC
- **Fresh before count:** 622 floating pins, 105 missing-power findings, 31 single-pin nets (758 total ERC findings).
- **Fresh after count:** 619 floating pins, 105 missing-power findings, 31 single-pin nets (755 total ERC findings).
- **Completed:** `ANT3:DUMMY_1::3`, `ANT3:DUMMY_2::6`, and `ANT3:DUMMY_3::7` were marked no-connect. The official P822601 datasheet identifies contacts 3, 6, and 7 as Dummy Pads. No processor/interface pin was suppressed.
- **Completed:** empty stale nets `FT600_D1` and `SARA_UART_TX_1V8` were deleted. Attempts to delete `FT600_D0`, `FT600_D2`, `FT600_D4`, `FLEXSPI1_SCLK`, `FLEXSPI1_DATA0`, and `SARA_UART_RX_1V8` timed out and read-back proved they remain empty; no blind retries were made.
- **Unchanged single-pin register:** all 31 exact entries above remain current. Each requires the missing retained controller/PMIC endpoint stated in the categorized blocker section; none was converted to no-connect.
- **Unchanged missing-power register:** 105 findings remain. Compute-migration items are `U1` processor rails, `U3` LPDDR4 rails, `U12:VCC/VCCQ/VDDI`, and the incomplete `U27` PMIC network; these require the qualified compute core, memory map, rail tree, and PMIC application circuit. Retained non-compute findings remain `U2:VDD_EXT` on `SARA_V_INT_1V8`, `U24:VDD(VMID)` on `NFC_VMID`, `U9:VBUS` on `WIRELESS_5V_IN`, `U19:VBAT_OK` on `SOLAR_STORAGE_PGOOD`, `U19:VBAT_OV` on `SOLAR_OV_SENSE`, `U19:VBAT` on `SOLAR_STORAGE_RESERVOIR`, and `U23:VBUS` with no net. `U2:VDD_EXT`, `U24:VDD(VMID)`, and the three `U19` pins are output/sense functions whose library pin typing must be corrected or source semantics resolved; they must not be given fake sources. `U9:VBUS` requires a verified Qi/dock power-path source. `U23:VBUS` requires a deliberate nRF USB-use decision and real USB VBUS endpoint.
- **Exact retained floating blockers outside compute:** `E3:1`, `E3:2`, `E3:S1`, `E3:S2` require the connector contact assignment; `U2:USB_VBUS` requires the independent BG95 debug-USB VBUS source, and `U2:GNSS_LAN_EN` requires the approved GNSS LNA/control implementation; `U16:XORH` and `U16:XORL` require the intended address-translation byte/divider (datasheet requires configuration, not floating); `ANT3:FEED`, `ANT3:GND`, `ANT3:LOW_BAND_TUNING`, `ANT3:HIGH_BAND_TUNING_1`, `ANT3:HIGH_BAND_TUNING_2`, `ANT3:DUMMY_4`, and `ANT3:DUMMY_5` require correction of the library symbol against the official seven-contact P822601 pinout plus the antenna matching/tuning design; `J11:6`, `J11:7`, `J11:8`, and `J11:10` require confirmed dock assignments. The previously listed nRF5340, PN7160, AD5940, MAX86176, sensor-link, eMMC, display, and debug contracts remain blocked on a verified retained controller endpoint/IOMUX and were intentionally left visible.
- **Source evidence:** official P822601 datasheet pin table (Feed=1, Ground=2, Dummy=3/6/7, Low-band tuning=4, High-band tuning=5); official LTC4316 datasheet requires XORL/XORH resistive configuration, with XORH tied to VCC only for pass-through mode. Micron eMMC/LPDDR4 public datasheets were unavailable from the attached parts, so RFU/DNU pins were not suppressed.
- **Bounded-attempt rule observed:** no unchanged violation received more than one genuine mutation attempt in this pass.
## Replacement-Core Sourcing Checkpoint — 2026-08-04
- Fresh unchanged-schematic ERC baseline after the non-destructive sourcing pass: **622 floating pins, 105 missing-power findings, 31 single-pin nets**.
- No schematic component/net mutation was made, so before→after is **622→622, 105→105, 31→31** for this pass.
- `MIMX8ML2DVNLZAB` was rejected because all 548 pins are Unspecified; this is a mandatory-pin blocker, not an ERC item that may be suppressed.
- `IM8G32L4JCBG-046I` is electrically typed and geometrically populated, but final x32 channel/byte mapping remains reference-dependent.
- `PCA9450CHNY` is typed and NXP-recommended for i.MX 8M Plus, but cannot be committed before CPU qualification and a closed mode/rail budget.
- No NC/RFU pins were newly marked and no fake power sources were added.
## Focused live ERC disposition — 2026-08-12
### Verification and mutation summary
- **Fresh before review:** 27 ERC errors, all `design_rule_check_erc_single_pin_net`, reviewed at `2026-08-12T00:38:41.616Z`.
- **Fresh after review:** 27 ERC errors, all `design_rule_check_erc_single_pin_net`, reviewed at `2026-08-12T00:42:59.896Z`.
- **Schematic mutations in this continuation:** none. Every remaining correction requires an endpoint or migration decision that is not present in the live schematic. Connecting by name similarity, deleting the retained legacy network, or applying no-connect markers would violate the non-destructive migration and no-guessing constraints.
- The earlier verified repairs remain present: `BOOT_MODE0`, `BOOT_MODE1`, `MCU_JTAG_MOD`, `MCU_SWDCLK_JTAG_TCK`, `MCU_SWDIO_JTAG_TMS`, `MCU_JTAG_TDI`, `MCU_SWO_JTAG_TDO`, `MCU_ONOFF`, and `MCU_POR_B` are no longer single-pin findings.
### Individual live findings and required closure evidence
#### Processor/peripheral control and data contracts — blocked, not intentional no-connects
1. `NFC_VEN` — `U24:VEN`. Required destination: processor NFC enable GPIO. **Evidence needed:** released RK3568 retained-interface IOMUX/VCCIO table naming the exact RK3568 ball/GPIO and control owner.
2. `NFC_IRQ` — `U24:IRQ`. Required destination: processor NFC interrupt GPIO. **Evidence needed:** exact RK3568 ball/GPIO, interrupt ownership, and VCCIO domain.
3. `NFC_WAKE_REQ` — `U24:WKUP_REQ`. Required destination: processor NFC wake/control GPIO. **Evidence needed:** exact RK3568 wake-capable ball/GPIO and power-domain ownership.
4. `BLE_WAKE` — `U23:P0.23`. Required destination: processor wake/control GPIO. **Evidence needed:** exact RK3568 GPIO/ball, direction, active level, and VCCIO domain.
5. `BLE_IRQ` — `U23:P0.24`. Required destination: processor interrupt GPIO. **Evidence needed:** exact RK3568 GPIO/ball, interrupt owner, and VCCIO domain.
6. `BLE_UART7_TX` — `U23:P0.20`. Required destination: processor UART receive input. **Evidence needed:** released RK3568 UART instance/pad assignment and confirmation that the retained net naming is to be renamed or preserved.
7. `BLE_UART7_RX` — `U23:P0.22`. Required destination: processor UART transmit output. **Evidence needed:** released RK3568 UART instance/pad assignment and matching VCCIO domain.
8. `BLE_RESET_N` — `U23:~RESET`. Required destination: reset owner GPIO/supervisor. **Evidence needed:** architecture decision identifying the controlling device and exact pin, active-low drive behavior, and required pull network.
9. `AD5940_LPSPI6_MISO` — `U4:MISO`. Required destination: processor SPI MISO input. **Evidence needed:** released RK3568 SPI instance and exact ball/IOMUX assignment.
10. `AD5940_LPSPI6_MOSI` — `U4:MOSI`. Required destination: processor SPI MOSI output. **Evidence needed:** released RK3568 SPI instance and exact ball/IOMUX assignment.
11. `AD5940_LPSPI6_SCK` — `U4:SCLK`. Required destination: processor SPI clock output. **Evidence needed:** released RK3568 SPI instance, exact ball/IOMUX assignment, and VCCIO domain.
12. `AD5940_INT_N` — `U4:GPIO0`. Required destination: processor interrupt GPIO. **Evidence needed:** exact RK3568 GPIO/ball, interrupt owner, polarity configuration, and VCCIO domain.
13. `MAX86176_TRIG` — `U5:TRIG`. Prior RT1176 architecture documented `GPIO_AD_20`, but no such endpoint exists on current `U1` (MIMX8MM) or staged RK3568. **Evidence needed:** authoritative current-compute replacement endpoint/ball and confirmation of signal direction/timing.
14. `MAX86176_INT1` — `U5:INT1`. Prior RT1176 architecture documented `GPIO_AD_18`, but no live current-compute endpoint exists. **Evidence needed:** authoritative current-compute GPIO/ball, interrupt owner, polarity, and VCCIO domain.
15. `MAX86176_INT2` — `U5:INT2`. Prior RT1176 architecture documented `GPIO_AD_19`, but no live current-compute endpoint exists. **Evidence needed:** authoritative current-compute GPIO/ball, interrupt owner, polarity, and VCCIO domain.
16. `SENSOR_LINK_EN` — `U21:ON`. Required destination: processor-controlled sensor-link enable. **Evidence needed:** exact controlling device/GPIO, default power state, active level, and any required pull resistor from the TPS22916 application requirements.
17. `SENSOR_LINK_INT` — `D7:IO3`. Required destinations: protected sensor-link interrupt conductor, connector pin, and processor interrupt input. **Evidence needed:** final sensor-link connector pin assignment plus exact processor GPIO/ball and VCCIO domain.
#### Intentionally staged MAX86176 analogue boundary — unresolved by architecture
18. `AFE_MODULE_TBD_ECGP` — `U5:ECGP`. **Classification:** intentional staged interface, not an unused pin. **Evidence needed:** approved electrode connector/mechanical architecture and source-backed MAX86176 ECG input network.
19. `AFE_MODULE_TBD_ECGN` — `U5:ECGN`. **Classification:** intentional staged interface, not an unused pin. **Evidence needed:** approved electrode connector/mechanical architecture and source-backed MAX86176 ECG input network.
20. `AFE_MODULE_TBD_RLD` — `U5:RLD`. **Classification:** intentional staged interface, not an unused pin. **Evidence needed:** approved right-leg-drive/electrode architecture and source-backed stability/protection network.
21. `AFE_MODULE_TBD_RLD_INV` — `U5:RLD_INV`. **Classification:** intentional staged interface, not an unused pin. **Evidence needed:** approved RLD feedback topology and exact component values from authoritative MAX86176 design documentation.
#### Quarantined RT1176 power remnants — real orphan nets, removal deferred by non-destructive migration rule
22. `DCDC_LP_SW` — `L1001:P1`. `L1001` is documented as the RT1176 `DCDC_LP`-to-`DCDC_LN` inductor. **Evidence needed:** explicit compute cutover approval allowing removal of the RT1176-only inductor/network; it must not be attached to MIMX8MM, RK3568, or RK809-5 by name similarity.
23. `DCDC_LN_SW` — `L1001:P2`. Same RT1176-only inductor quarantine. **Evidence needed:** explicit compute cutover approval and a validated replacement power tree.
24. `VDD_LPSR_DIG` — `C41:P1`. RT1176-domain bypass remnant. **Evidence needed:** explicit cutover approval to remove the dedicated legacy capacitor/net after replacement-compute power validation.
25. `VDD_LPSR_ANA` — `C45:P1`. RT1176-domain bulk-capacitor remnant. **Evidence needed:** explicit cutover approval to remove it after replacement-compute power validation.
26. `VDD_SNVS_DIG` — `C46:P1`. RT1176-domain bulk-capacitor remnant. **Evidence needed:** explicit cutover approval to remove it after replacement-compute power validation.
27. `VDD_SNVS_ANA` — `C48:P1`. RT1176-domain bypass remnant; the `U1` wording in its role metadata is stale and does not match current `U1` (`MIMX8MM5DVTLZAA`). **Evidence needed:** explicit cutover approval to remove it after replacement-compute power validation.
### Closure statement
- **Genuine and endpoint-blocked:** 17 processor/peripheral contracts.
- **Intentional staged interfaces:** 4 MAX86176 analogue nets.
- **Genuine legacy orphans quarantined for rollback:** 6 RT1176 power nets.
- **False positives:** 0 of the 27; the checker correctly reports single-ended nets, but the safe disposition is to leave them visible until their documented blockers close.
- **Safe actionable fixes remaining with current evidence:** 0. No finding was suppressed, converted to no-connect, or connected to a guessed compute/PMIC endpoint.
## Focused ERC classification pass — 2026-08-12 09:59 UTC
### Review provenance and exact returned counts
- **Reviewed schematic commit:** `1baeb8f5` (latest electrical commit; subsequent `beb0265c` changes only this project file).
- The fresh ERC request for floating-pin, missing-power, and single-pin-net checks was reviewed at `2026-08-12T09:59:49.094Z`.
- The review service returned **27 single-pin-net errors**, exactly matching the 27-item live register above.
- The same fresh request returned **no floating-pin review object and no missing-power review object**. Separate direct invocations at `2026-08-12T09:53:55.780Z`, `2026-08-12T09:57:19.863Z`, and `2026-08-12T09:57:59.472Z` likewise returned empty review payloads for those checks. Therefore a fresh exact floating-pin or missing-power total cannot be asserted from this pass; the last exact retained totals remain **619 floating pins** and **105 missing-power findings**, but they are historical baselines, not relabeled as fresh results.
- **Before → after for this pass:** single-pin nets **27 → 27**; floating pins **fresh count unavailable → fresh count unavailable**; missing power **fresh count unavailable → fresh count unavailable**. No schematic mutation was made, so no ERC category was intentionally suppressed.
### U9 / WIRELESS_5V_IN disposition
- Read-back proves `WIRELESS_5V_IN` contains `U9:VBUS`, `U14:OUT`, `C210:P1`, `C211:P1`, and `C301:P1`; the return sides of all three capacitors are on `GND`.
- The official TI BQ51013B datasheet identifies `OUT` pin 4 as I/O type **O** and states: **“Output pin, delivers power to the load.”** The typical application describes the BQ51013B as a wireless power receiver and power supply for system loads.
- The Flux library record for `BQ51013BRHLT` is incorrectly categorized as logic with `logicFunction=AND`, and the live ERC does not recognize `U14:OUT` as the rail driver. The safe project mutation interface cannot target only this terminal's electrical type on the third-party library part; applying component-wide `Pin Type` would corrupt other terminal semantics.
- **Classification:** documented library-typing artifact, not a broken power path. No power flag, fake source, or unrelated connection was added. A library part-quality report was filed for correction of `U14:OUT` and the incorrect part classification.
### Quantitative disposition of the 27 live single-pin findings
- **17 genuine endpoint-blocked processor/peripheral contracts:** NFC, BLE, AD5940, MAX86176 digital control/interrupt, and sensor-link endpoints awaiting authoritative RK3568 IOMUX/ownership.
- **4 intentional staged analogue interfaces:** `AFE_MODULE_TBD_ECGP`, `AFE_MODULE_TBD_ECGN`, `AFE_MODULE_TBD_RLD`, `AFE_MODULE_TBD_RLD_INV`; these are not unused pins.
- **6 genuine legacy RT1176 orphans retained for rollback:** `DCDC_LP_SW`, `DCDC_LN_SW`, `VDD_LPSR_DIG`, `VDD_LPSR_ANA`, `VDD_SNVS_DIG`, `VDD_SNVS_ANA`; removal awaits explicit destructive-cutover approval.
- **0 safely actionable single-pin fixes** with current authoritative evidence; **0 no-connect markers** added and **0 unrelated nets** joined.
### Completion status for this scoped pass
- **Completed:** fresh single-pin ERC, exact 27-item classification, U9/WIRELESS_5V_IN connectivity proof, datasheet proof of `U14:OUT` output behavior, non-editable library-artifact disposition, and library quality escalation.
- **Blocked:** exact fresh floating-pin and missing-power before/after totals because the ERC service returned no review objects for those two requested checks. These counts must be rerun when those check endpoints return data; historical `619/105` values remain clearly labeled historical.
## Focused ERC remediation follow-up — 2026-08-13
### Fresh before/after results
- **Verified before baseline supplied for this pass:** floating pins **1372** at `2026-08-13T21:22:38Z`; missing-power / power-pin findings **0 open** at `2026-08-13T21:23:11Z`; single-pin nets **27** at `2026-08-13T21:23:43Z`.
- **Fresh post-work rerun:** floating pins **1372** at `2026-08-13T21:31:10.392Z`; missing-power / power-pin findings **0** at `2026-08-13T21:30:21.937Z`; single-pin nets **27** at `2026-08-13T21:29:10.582Z`.
- **Before → after:** floating pins **1372 → 1372**; missing power **0 → 0**; single-pin nets **27 → 27**.
- **Connectivity mutations:** none. The check/classify pass found no genuine issue that could be repaired unambiguously from currently released design intent without violating the migration gates.
### Why the floating total is now much higher than the old ~755 combined baseline
The current ERC population includes deliberately staged or disconnected compute components that were not represented equivalently in the older retained-schematic baseline. Exact dominant component counts are:
| Component | Floating-pin findings | Disposition |
|---|---:|---|
| `U30` staged RK3568 | **560** | Migration/staging blocker. Includes DDR AC/DQ/DQS/ZQ, DDR rails, processor rails/grounds, clocks, I/O banks and unallocated interfaces. No DDR or PMIC-dependent wiring is permitted without the authoritative Rockchip topology/IOMUX and rail map. |
| `U1` disconnected legacy compute | **364** | Intentional non-destructive migration quarantine. Must not be reconnected or silently removed. |
| `U27` RK809-5 | **54** | Unwired PMIC staging blocker. Exact output-to-load rail assignments and support network are not yet approved; no rail assignment may be invented. |
| `U12` eMMC | **33** | Migration blocker. Data/control and supply closure depends on the released RK3568 eMMC IOMUX and validated rail topology; `RFU` treatment also requires authoritative part evidence. |
| All other components | **361** | Retained peripherals, connectors, staged interfaces, genuine endpoint-blocked pins, and library pin-typing artifacts. These remain visible rather than being guessed or suppressed. |
| **Total** | **1372** | Exact current floating-pin result. |
The four compute/memory/PMIC components alone account for **1011 of 1372** floating findings. Therefore the current total must not be compared directly with the old approximately **755 total-ERC** baseline as if it were a regression in the retained design: staged RK3568, disconnected legacy `U1`, unwired RK809-5, and staged eMMC are now included.
### Semantic classification
- **Intentional migration/staging blockers:** the dominant `U30`, `U1`, `U27`, and `U12` populations above; staged MAX86176 electrode/RLD boundary nets; and retained RT1176 rollback remnants. These are intentionally visible but are not production-ready.
- **Genuine design errors or incomplete contracts:** the 17 processor/peripheral single-pin contracts already enumerated in the 2026-08-12 register (NFC, BLE, AD5940, MAX86176 digital control/interrupt, and sensor link), plus smaller floating active-component/connector endpoints such as `U2:USB_VBUS`, `U2:GNSS_LAN_EN`, `E3:1/2/S1/S2`, LTC4316 configuration pins, dock assignments, RF/tuning endpoints, and other retained interfaces. They are real incompletions, but none has a safe destination derivable from the released RK3568 IOMUX, connector, RF, or control evidence currently in the project.
- **Library pin-typing artifacts:** the previously investigated `U9:VBUS` / `WIRELESS_5V_IN` report is cleared. `U14:OUT` genuinely drives that rail; no fake source was added. The former condition was caused by library electrical typing rather than a broken power path. Other suspicious typed-pin findings must continue to be proven individually and must not be cleared with global power flags or guessed wiring.
- **Current power-pin category:** **0 findings**. This does not prove the staged compute power tree is complete; many staged mandatory pins appear under floating-pin ERC, and the RK809-5 rail map remains a release blocker.
### Exact current single-pin category
The current result remains the same **27** entries listed in the 2026-08-12 focused live disposition:
- **17 genuine endpoint-blocked processor/peripheral contracts**.
- **4 intentional staged MAX86176 analogue interfaces**.
- **6 genuine legacy RT1176 orphan nets retained for rollback**.
- **0 checker false positives** in this category and **0 safely actionable fixes** with current authoritative evidence.
### Fix decision and release statement
- No finding was converted to no-connect, connected by name similarity, attached to a guessed RK3568/RK809-5 rail, or hidden with a fake power-source symbol.
- No DDR AC/DQ/DQS/ZQ signal or DDR rail was wired; legacy `U1` was not reconnected; no PMIC rail assignment was invented.
- **Safe fixes completed in this pass: 0.** The unchanged rerun is the expected result of the bounded check → classify → recheck loop when all remaining candidate fixes are evidence-blocked.
- **Production status:** ERC is not clean, and the staged compute implementation is explicitly **not production-ready**. Closure still requires the authoritative Rockchip LPDDR4X reference topology/IOMUX package, fully audited RK809-5 part and exact rail map, released peripheral GPIO/IOMUX ownership, and the complete rail budget/power-tree evidence.