# ICM-20608-G Reference Design ## Description This is the ICM-20608-G IMU reference design. This reference design has a basic I2C circuit for communication built according to the manufacturer's recommendations #IMU #ICM-20608-G #I2C #referenceDesign #tdk #template #reference-design ## Project Details - **Owner:** vasyl - **Created:** 10/12/2023 - **Last Updated:** 2/8/2024 - **Visibility:** Public - **License:** https://creativecommons.org/licenses/by/4.0/ - **Copies:** 1 ## Key Components ### IC1 — [ICM-20608-G](https://www.flux.ai/vasyl/icm-20608-g~bmh.md) - Manufacturer Name: TDK InvenSense - License: https://creativecommons.org/licenses/by/4.0/ - Datasheet URL: https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000081-v1.01.pdf - Manufacturer Part Number: ICM-20608-G - Part Type: IMU **Pins:** - AD0/SDO [pin 4] - CS [pin 5] - FSYNC [pin 8] - GND [pin 9] - GND__1 [pin 10] - GND__2 [pin 11] - GND__3 [pin 12] - GND__4 [pin 13] - GND__5 [pin 15] - INT [pin 6] - REGOUT [pin 14] - SCL/SCLK [pin 2] - SDA/SDI [pin 3] - VDD [pin 16] - VDDIO [pin 1] ### J1 — [Pin Header 01x04 2.54mm](https://www.flux.ai/vasyl/pin-header-01x04-254mm~de3.md) - Part Type: Connector **Pins:** - Pin_1 - Pin_2 - Pin_3 - Pin_4 ### J2 — [Pin Header 01x04 2.54mm](https://www.flux.ai/vasyl/pin-header-01x04-254mm~de3.md) - Part Type: Connector **Pins:** - Pin_1 - Pin_2 - Pin_3 - Pin_4 *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/vasyl/icm-20608-g-reference-design~erj](https://www.flux.ai/vasyl/icm-20608-g-reference-design~erj).* --- *Generated from [https://www.flux.ai/vasyl/icm-20608-g-reference-design~erj](https://www.flux.ai/vasyl/icm-20608-g-reference-design~erj)*