# ICM-20600 Reference Design ## Description This is the ICM-20600 IMU reference design. This reference design has a basic I2C circuit for communication built according to the manufacturer's recommendations #IMU #ICM-20600 #I2C #referenceDesign #tdk #template #reference-design ## Project Details - **Owner:** vasyl - **Created:** 10/11/2023 - **Last Updated:** 2/8/2024 - **Visibility:** Public - **License:** https://creativecommons.org/licenses/by/4.0/ - **Copies:** 1 ## Key Components ### IC1 — [ICM-20600](https://www.flux.ai/vasyl/icm-20600.md) - Part Type: IMU - Datasheet URL: https://www.farnell.com/datasheets/2632675.pdf - Manufacturer Name: TDK InvenSense - License: https://creativecommons.org/licenses/by/4.0/ - Manufacturer Part Number: ICM-20600 **Pins:** - ~CS [pin 12] - AD0/SDO [pin 1] - FSYNC/NC [pin 10] - GND [pin 6] - INT1 [pin 4] - INT2 [pin 9] - REGOUT [pin 11] - RESV [pin 7] - SCL/SCLK [pin 13] - SDA/SDI [pin 14] - VDD [pin 8] - VDDIO [pin 5] ### J1 — [Pin Header 01x04 2.54mm](https://www.flux.ai/vasyl/pin-header-01x04-254mm.md) - Part Type: Connector **Pins:** - Pin_1 - Pin_2 - Pin_3 - Pin_4 ### J2 — [Pin Header 01x05 2.54mm Vertical for max9814 mic](https://www.flux.ai/zkorpio/pin-header-01x05-2p54mm-vertical-for-max9814-mic.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - AR [pin 1] - GAIN [pin 3] - GND [pin 5] - OUT [pin 2] - VDD [pin 4] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/vasyl/icm-20600-reference-design](https://www.flux.ai/vasyl/icm-20600-reference-design).* --- *Generated from [https://www.flux.ai/vasyl/icm-20600-reference-design](https://www.flux.ai/vasyl/icm-20600-reference-design)*