Realistic Lanyard Mockup


Can you mock this up hanging on a someone neck with a lanyard. Make it super realistic, we don't need to show the person's face. Person's wearing a black tshirt and white lanyard.
I’ll make a photorealistic mockup of the camera on a white lanyard over a black T-shirt, cropped to keep the person’s face out of frame.
The full-assembly render timed out. I’ll try rendering just the enclosure so the mockup stays faithful to its shape. The high-detail image generation will then take about 2–4 minutes.

Edited image

can we not center the device? maybe the body to the left? So I can see his left arm?
I’ll shift the person and device to the left of the frame and widen the crop to show his left arm, keeping the black T-shirt, white lanyard, and face out of view.
The high-detail edit should take about 2–4 minutes.

Edited image


Passive MPN Sourcing
Final batch status — 2026-10-20
All 108 initially missing passive MPN instances are now assigned: 26 resistors,76 capacitors,5 inductors,1 LED; 21 Basic and87 Extended; zero missing, failed or unattempted MPN assignments. The latest21 are explicitly assumption-based provisional selections under new user authorization to accept engineering assumptions and ignore stock as a selection gate. Procurement-field completion is NOT electrical, assembly, safety or production qualification. Earlier87 assignments preserved. Initial inventory139 components/134 nets; other project activity later removed a net, outside this sourcing work. Only procurement properties changed here; all present nominal values, footprints, connections, placement, routing and rules preserved. R1's previously blank Resistance field remains blank; its chosen MPN embodies an explicitly assumed0Ω RF link. Original commits: fb9ef8cc,3b4fbce1,9676ce94,1915fdcd,5743eec4,91000b8d; correction commits272b2283,72b72bcc; authorized completion commit66267f20.
Prominent procurement limitation — C3 is retained on Mouser stock evidence only, NOT verified JLC turnkey stock. LCSC showed zero; Mouser showed 11062. Its assignment is not evidence of JLC assembly availability.
Latest21 — completed provisional selections
Facts below are from the linked part sources; operating envelopes are design assumptions, not component guarantees. Default prototype ambient0…50°C; rails are low-voltage battery/USB-derived, not mains. Stock snapshots are informational, not reserved. Class and supplier IDs checked against library/JLC/LCSC records, not inferred from stock.

Table


Designator(s)Manufacturer / MPNSupplier / classSource-supported ratingsAssumed envelope, warning and required testStock evidence
R1Yageo RC0201JR-070RLC106228 / Extended0Ω jumper,0201,50mW;0.5A catalog rated currentAssume removable RF series link from U2 ANT to J1 signal, not a matching resistor; assume≤20dBm RF. No resistance value overwritten. RF parasitics not characterized: measure return loss/insertion loss and antenna performance at2.4GHz.LCSC search snapshot1,051,200
R12Yageo RC0201FR-07330RLC274872 / Extended330Ω,1%,50mW,25V,0201Retain330Ω; assume VSYS≤5V, LED Vf≥1.5V during normal operation and ambient≤50°C. With1% low resistance, I≤10.72mA and P≤37.5mW; typical1.95V gives9.3mA/28.5mW. Not50%-derated at worst corner. LED short gives≈76.5mW and is NOT covered. Check CHGB sink capability, measured current, resistor temperature and external-power VSYS.Earlier direct1,338,500; not refreshed
R24Yageo RC0201FR-071MLC295786 / Extended1MΩ,1%,50mW,25V,0201Assume ordinary EMI/bleed function, shield-to-GND DC≤5V (25µW); no isolation, safety, surge or ESD-energy qualification. Measure shield offset/leakage and EMC.Earlier direct2,321,300; not refreshed
LED1Kingbright APHHS1005SURCKC2852592 / ExtendedRed630nm,1.0×0.5×0.5mm0402; Vf1.95Vtyp/2.5Vmax at20mA;30mA absolute DC at25°CChosen red charging/status indicator. Expected≈3–10mA from existing330Ω at battery/USB VSYS; use same normal envelope as R12. Absolute rating is not a target. Verify brightness, hot-current derating, CHGB operation and physical cathode alignment to existing K1/A2 pads before assembly.Current stock unknown
C4,C10,C11,C23Samsung CL05A475MP5NRNCC23733 / Basic4.7µF,20%,10V,X5R,0402Assume VSYS/PMIC battery≤5V and adequate bias-reduced capacitance for prototype bypass. Restored under stock-independent authorization; measure rail ripple/startup and review DC-bias curves.Authoritative LCSC OUT OF STOCK; NOT verified turnkey stock
C5Samsung CL05A225KP5NNNCC7464343 / Extended2.2µF,10%,10V,X5R,0402,1.00×0.50×0.50mm nominalAssume U2 VIN_LDO switch output≤3.3V. Preserves2.2µF despite reference4.7µF vicinity discrepancy. Functional warning: may provide inadequate effective capacitance; scope startup, ripple, Wi-Fi TX load steps and brownout at battery extremes.Current stock unknown; BOM has0 enriched SKUs, not proof of nonexistence
C17Samsung CL03A105MP3NSNCC170153 / Extended1µF,20%,10V,X5R,0201,0.60×0.30×0.30mmAssume USBPHY output≤3.3V; nominal value retained. Earlier requirement read0.7–2.2µF/ESR≤10mΩ is NOT proven by this part's sourced specification. No false ESR or effective-capacitance guarantee. Verify exact regulator requirements and impedance under bias, then startup/USB stability.Earlier direct292,350; not refreshed
C18Samsung CL03A105MP3NSNCC170153 / Extended1µF,20%,10V,X5R,0201Assume INT2P7≤2.7V. Retained1µF conflicts with current nominal2.2µF recommendation (older guide1µF). Provisional BOM choice does not resolve this circuit-revision discrepancy. Test charger startup, ripple and battery/USB transitions.Earlier direct292,350; not refreshed
C24Samsung CL03A105MP3NSNCC170153 / Extended1µF,20%,10V,X5R,0201Assume REG≤3.3V. Retained1µF differs from MAX17262 published0.47µF recommendation. Allowed range remains unconfirmed; assess REG stability, startup and fuel-gauge accuracy before production.Earlier direct292,350; not refreshed
C50,C51,C52Samsung CL05A225KP5NNNCC7464343 / Extended2.2µF,10%,10V,X5R,0402Assume internal LDO/VCAP mode,≈1.2V.10% initial tolerance chosen over Basic20% to leave more nominal margin, NOT proof of±20% effective C or ESR<100mΩ over bias/temp/aging. Confirm U1 pin mode, characterize effective capacitance/impedance and scope VCAP at boot and maximum clock/load.Current stock unknown
C66FH 0201B472K500NTC66943 / Extended4.7nF,10%,50V,X7R,0201,0.6×0.3×0.3mmAssume functional EMI coupling across≤5V DC shield-to-GND. NOT safety/isolation or surge/ESD-qualified.50V is working rating, not an IEC ESD withstand claim. Test EMC; separately design/qualify transient protection if required.Current stock unknown
L1Taiyo Yuden MCHK1608T2R2MKNC3910547 / Extended2.2µH,20%,292mΩmax;1.2A thermal at40°Crise;1.5A inductance-change at30% drop;1.6±0.2×0.8±0.2×0.8max mmAssume≤0.6Arms and≤1.0Apeak, product temperature<125°C. Higher sourced current margin than rejected LQM18's0.25A inductance-change limit; not a claim of global optimum. Scope actual switch peak/TX bursts, verify heat and startup. Manufacturer renamed this MPN to LSCNB1608HKT2R2MD / LLCNB1608HKT2R2MD depending use; retained real stocked legacy order code, lifecycle warning.LCSC search snapshot7,915; image snapshot4,695 differs
L2,L3,L4Murata DFE18SAN1R0ME0LC2044564 / Extended1µH,20%,144mΩmax;1.6A thermal at40°Crise;2A at30% inductance change;1.6±0.2×0.8±0.2×0.8mmAssume each rail≤1.0Arms and≤1.5Apeak, ambient≤50°C/product<125°C. This does NOT authorize full PMIC current-limit operation. Scope current ripple, startup/short-limit peaks, rail transients and heat. Power-stage layout and loop stability not qualified by MPN selection.Earlier direct1,730; current search-image1,465; snapshots not reservations
L5DDY WI0603LD330KST-C-HFC18221246 / Extended33µH,10%,8.58Ωmax DCR,120mA catalog current; datasheet Irms typical,40°Crise;15MHz SRF;1.8×1.25×1.10mm maxAssume VDDA/VREF load≤5mA, giving≤42.9mV DC drop and≈0.215mW copper loss. Not a buck inductor. High DCR and33µH resonance may impair analog performance. Measure VDDA/VREF at ADC load, settling, resonance and noise; use actual body envelope for clearance/MCAD.LCSC image search snapshot3,240
Physical fit review — unchanged inductor footprint
Read current PCB node trees for L1,L2 and L5. Shared0603 footprint version on all five uses two0.875×0.950mm rectangles at x=±0.7875mm: inner gap0.700mm, outer span2.450mm. L3/L4 share same source footprint version as L2. This is actual existing copper, not assumed standard geometry.
  • L1 sourced body1.6±0.2×0.8±0.2mm and end-electrode dimension0.4±0.2mm give ordinary end-terminal overlap with those pads; numeric recommended lands were not recoverable from PDF text. Retained existing larger land area provisionally; exact solder-process qualification pending.
  • L2–L4 sourced recommended lands are0.8×0.8mm,0.4mm gap,2.0mm outer span. Existing pads are larger with a0.7mm gap, so they are NOT identical to recommendation. Nominal0.3mm end electrodes still overlap existing copper; no known hard terminal/body mismatch identified. Heel fillet/placement-shift and solderability must be checked with assembler; do not call this manufacturer-pattern compliant.
  • L5 actual maximum width1.25mm is wider than nominal1608 body and wider than0.95mm pads; body overhang itself is not a conductive short. Datasheet E/F/D are0.64/1.02/0.64mm typical, but PDF extraction did not unambiguously identify terminal axes. End termination on two existing pads is a provisional mechanical assumption, NOT certified land-pattern equivalence. Check drawing/physical sample and solder coupon before assembly. No footprint or3D asset was enlarged; MCAD must use1.8×1.25×1.10mm max, not existing generic model alone.
No known mandatory package substitution was forced; no new pad/route edits were made. The geometry deviations above remain manufacturing-qualification warnings, especially L5. This does not claim a complete courtyard/collision audit.
Sources for latest selections
Earlier87 retained assignments (unchanged)

Table


DesignatorsManufacturer / actual MPNSupplier IDJLC classNominal ratings / package
R2–R6Yageo RC0201FR-0710KLC106225Extended10kΩ,1%,50mW,25V,0201
R7–R11,R15–R17,R23Yageo RC0201FR-07100KLC106224Extended100kΩ,1%,50mW,25V,0201
R14,R21,R22,R25,R26Vishay CRCW02011K00FNEDC3008826Extended1kΩ,1%,50mW,0201
|R13|Yageo RC0201FR-078K06L|C327379|Extended|8.06kΩ,1%,50mW,25V,0201| |R18–R20|Yageo RC0201FR-07330RL|C274872|Extended|330Ω,1%,50mW,25V,0201| |C1,C13–C15,C19,C34–C37,C40–C48,C53,C56–C64,C69–C75 (35)|Murata GRM033R61E104KE14D|C76939|Extended|0.1µF,10%,25V,X5R,0201| |C2,C39,C49 (3)|Samsung CL05A225MQ5NSNC|C12530|Basic|2.2µF,20%,6.3V,X5R,0402|
|C3|Samsung CL10A475KO8NQNC|C377756|Extended|4.7µF,10%,16V,X5R,0603| |C6,C12,C20,C21,C25–C27,C55,C65,C76 (10)|Samsung CL03A105MP3NSNC|C170153|Extended|1µF,20%,10V,X5R,0201| |C7–C9,C22,C28–C33,C38,C54,C67,C68 (14)|Samsung CL10A106KP8NNNC|C19702|Basic|10µF,10%,10V,X5R,0603| |C16|Taiyo Yuden TMK107BBJ106MA-T|C386081|Extended|10µF,20%,25V,X5R,0603|
Retained subtotal:23 resistors+64 capacitors=87 assignments,17 Basic/70 Extended. Latest21 above add3 resistors+12 capacitors+5 inductors+1LED,4 Basic/17 Extended. Combined108,21 Basic/87 Extended. All MPNs are manufacturer orderable numbers, not supplier C-numbers. All35 equal0.1µF instances retain canonical Extended Part class.
Basic preference and procurement evidence
Explicit Basic searches and the public economic-parts catalog were consulted before Extended choices. Existing tiny footprints were preserved; no larger Basic part justified a package change. No exact Basic0201 resistor/1µF capacitor or suitable0603 switching-inductor match was established. C16 needs25V margin, unlike the ordinary10V bulk group.
Observed stocks are snapshots, not reservations. Direct LCSC pages use https://www.lcsc.com/product-detail/C.html . Earlier direct reads: C106225646200; C1062242011600; C300882610100; C2957862321300; C3273794400; C2748721338500; C125302838700; C197021100700; C170153292350. JLC C76939 stock1084791 observed earlier. L1 library enrichment: LCSC3500, Mouser152513. C16 library: LCSC66160; direct JLC search:8194.
C23733 stock warning retained: direct LCSC and independent verification show zero stock. Undated third-party stock is NOT verified current stock. These four were previously withdrawn, then restored only after explicit user authorization that stock no longer blocks. No live-stock claim is made. Alternate CL05A475KP5NRNC/C368809 remains unassigned.
Warning — C3 availability: Basic CL10A475KO8NNNC/C19666 is NRND on Samsung manufacturer page, despite substantial stock. Selected manufacturer mass-production replacement CL10A475KO8NQNC instead. Library shows LCSC0 and Mouser11062; JLC stocks must be confirmed or consigned. Manufacturer specification: https://product.samsungsem.com/mlcc/CL10A475KO8NQN.do .
Rating/reference evidence and qualification boundaries
Yageo RC0201:50mW at70°C,25V maximum working voltage, selected1% variants; derate at elevated temperature. Body0.60×0.30mm matches existing0201. Vishay0201 dimensions0.6×0.3mm.
USB3320 RBIAS requires8.06kΩ±1%; R13 meets that requirement. R18–R20 are existing3.3V RGB limiters; even zero forward-drop gives33mW in330Ω, below50mW at rated conditions. Warning: PC13 current capability and thermal derating still require system review.
Murata0.1µF selection is25V±10%X5R,−55…85°C. Ordinary bypass selections assume consumer operation no hotter than85°C; temperature ceiling was not specified. Manufacturer specification PDFs consulted:
PF1550 specifies nominal1µH+2×10µF combinations, and reference inductors. Current NXP datasheet web read confirms LDO1 nominal4.7µF and LDO2 nominal10µF X5R/X7R rated≥2× output voltage; assigned10V capacitors exceed twice2.8V/1.8V. C20/C21 are VCORE/VDIG nominal1µF. These selections match nominal reference values; no numeric SWx effective-capacitance minimum/ESR range was found in the cited table. Warning: operating DC-bias/temperature curves, loop stability and startup are not measured or fully qualified. Do not represent procurement assignment as whole-board electrical signoff.
L1 candidate LQM18PN2R2MGHD was withdrawn. Type1DX reference series: https://www.mouser.com/datasheet/2/281/lbee5kl1dx-1274263.pdf ; specification: https://pdf.htelec.com/pdf/murata/JELF243B-0047.pdf . Body1.6±0.15×0.8±0.15×0.8±0.15mm; DCR200mΩtyp/250mΩmax; inductance-change current0.25A guaranteed/0.35Atyp, thermal current1.05A guaranteed/1.15Atyp. 1.05A thermal rating is NOT a switching-current allowance. Recommended reflow lands a0.7,b2.0,c0.7mm. Peak switching current versus inductance-change limit and existing generic0603 land geometry remain unqualified.
Info — C22: bridges VSYS to PMIC_VBATT, not GND. NXP describes optional10µF VBATT–VSYS capacitance for low EOC thresholds; this connection need not be an error. Application condition/OTP EOC configuration remains to verify.
Historical blockers — superseded by latest provisional selections above
The following table preserves the earlier review rationale as history only. Every listed MPN blank is now filled; “Failed/blocked” below describes the previous conservative sourcing state, not current task status. Functional concerns remain warnings/tests, not asserted qualification.

Table


Item(s)StatusSpecific blocker and evidence / recovery
C4,C10,C11,C23Failed/blockedC23733 authoritative stock is zero; undated third-party stock does not qualify. Assignments withdrawn; no freshly verified alternate selected.
R24Failed/blockedSHIELD–GND in parallel with C66. Ordinary RC0201FR-071ML assignment withdrawn because shield transient/pulse voltage, energy and safety requirements are unknown; same qualification blocker as C66.
L1Failed/blockedAssignment withdrawn: candidate inductance-change rating is0.25A, not1.05A thermal allowance. Need actual peak switching current and reference/generic land-pattern compatibility evidence.
R1Failed/blockedRF feed resistance absent. No safe MPN without intended resistance/matching requirement; never assume0Ω.
R12Failed/blockedExisting330Ω0201 charges LED1 from VSYS.50mW candidate C274872 found, but LED1 forward voltage and intended current absent; full5V stress is75.8mW. Need LED1 selection and guaranteed VSYS maximum/thermal budget before rating choice.
LED1Failed/blocked0402 polarity known (1K,2A), color/brightness/forward voltage unspecified; no defensible single MPN.
C5Failed/blockedExisting2.2µF0402 is wireless switch-output cap; consulted Type1DX reference shows4.7µF near switching-output circuit. Reconcile exact node/reference and permitted effective minimum before assigning2.2µF; do not silently change value.
C17Failed/blockedPF1550 USBPHY1µF0201 requires0.7–2.2µF and ESR≤10mΩ. CL03A105MP3NSNC sourced, but no evidence proves≤10mΩ and effective minimum on this output.
C18Failed/blockedExisting1µF0201 on INT2P7 conflicts with current PF1550 nominal2.2µF recommendation. Older guide says1µF; resolve revision applicability before procurement; no authorized value change.
C24Failed/blockedExisting1µF0201 on MAX17262 REG differs from published0.47µF recommendation. Allowed capacitance range not established; direct ADI datasheet fetch failed (provider error), web-index context supports discrepancy only. Need authoritative allowed-range confirmation or authorized value correction.
C50,C51,C52Failed/blockedExisting2.2µF0402 U1 isolated supply caps: VCAP requirement±20%,ESR<100mΩ verified. Basic CL05A225MQ5NSNC has20% initial tolerance, leaving no guaranteed DC-bias margin; source PDF lacks numeric bias/ESR proof.10% alternatives found but their operating-bias qualification not established. Need operating pin/mode confirmation and manufacturer curve evidence.
C66Failed/blocked4.7nF0201 SHIELD–GND capacitor; transient/safety requirement unspecified.50V X7R0201B472K500NT/C66943 and TCC0201X7R472K500ZT/C5142549 found, but cannot qualify50V for shield-ESD exposure without requirement. No exact Basic0201 match established.
L2,L3,L4Failed/blocked1µH0603 PF1550 buck inductors: reference DFE160808S family identified but complete stocked order code/datasheet not established. Alternative DFE18SAN1R0ME0L/C2044564 direct stock1730,1.6Athermal/2Asaturation/144mΩ found; not selected because rail load/peak-current margin and original footprint-land compatibility are unproven. Need rail current budgets or exact reference-component qualification. No exact Basic suitable match found.
L5Failed/blocked33µH0603 analog VDDA/VREF filter, not switching. Exact WI0603LD330KST-C-HF/C18221246 found:120mA,8.58Ω DCR,Extended. Need analog load current/acceptable DCdrop and transient resonance requirements before accepting this high-DCR filter; larger power parts advertising0603 were rejected because actual bodies5–6.5mm. No exact Basic suitable match found.
Historical count21. Current residual missing-MPN designators: none. All21 now have provisional selections in the latest table; electrical concerns have not been erased by populating fields.
Nonpassive inventory and placeholders
Nonpassives untouched/out of scope. Existing issues noted by independent reviewer: malformed U1 MPN M despite STM32H747AII6 part name; U4 primary MAX17262REWL_T and J1 composite alternate string need separate normalization; U7 is omitted from the BOM and its inclusion/exclusion needs separate review. None was changed. No invented procurement numbers on excluded test padTP1, Logo, text annotations, Battery3D model or Flux artwork. Battery3D and Made with artwork BOM-exclusion treatment merits review.
Verification evidence and limits
Latest authorized-completion verification
Completed current-state read of all21 before mutation, then post-mutation read-only schematic/property reread of all21 and full filtered BOM (all28 grouped rows). All21 exact MPN/manufacturer/LCSC/class properties confirmed. Final initial-missing-passive total108 (26R+76C+5L+1LED) contains no unassigned rows; earlier87 MPNs still present unchanged. Existing LED2 and CAM_CONN excluded from this108 count. Nominal values/positions in the targeted reread unchanged; R1 Resistance still blank as intentionally preserved. Mutation66267f20 used procurement/property editing only and requested introduced-problem checks; no introduced electrical/layout Error was returned. One metadata warning: DDY is nonstandard-option text but is a real supplier-listed manufacturer and was retained accurately. Full-board ERC/DRC was not run for signoff.
Focused-correction verification
Completed post-correction full filtered BOM reread (all24 grouped rows):87 newly assigned instances remain (23R+64C);21 initial passive instances have no MPN, exactly matching the residual designator list. Existing LED2 and CAM_CONN were excluded from these initial-missing-passive counts. C4,C10,C11,C23,R24,L1 are confirmed MPN-free. Completed read-only schematic/property reread of all35 GRM033R61E104KE14D instances: every instance is grouped with JLCPCB Part Class = Extended Part and retains the same MPN, supplier ID and0.1µF value. Basic count is17, Extended count70. All focused correction items completed; no focused item failed or unattempted. No new stock claims or nonpassive edits made.
Before focused correction, full filtered BOM confirmed93 assigned instances. Six unsupported assignments were withdrawn and35 identical Murata capacitor class properties normalized; final expected total87 assigned and21 blocked. Targeted read-only BOM/property rereads are recorded in the focused-correction verification below. Earlier read-only nets/schematic examination confirmed C17→USBPHY,C20→VCORE,C21→VDIG,C24→REG, plus regulator-output reference roles. Original inventory139 components/134 nets; no topology mutations issued. Both focused mutation calls requested introduced-problem checking and returned no introduced Error/Warning design findings.
Independent full-board ERC/DRC signoff, exhaustive geometry/courtyard diff, biased-capacitance characterization, thermal testing and procurement reservation remain unattempted/out of sourcing batch scope, not claimed completed. Recheck live JLC class/stock and exact assembly service before ordering. The MPN-population batch is complete108/108; overall electrically/manufacturably qualified design remains incomplete pending the explicit warnings/tests above. No present sourcing blocker remains under the new assumption-and-stock authorization.
  • Final batch status — 2026-10-20

  • Latest21 — completed provisional selections

  • Physical fit review — unchanged inductor footprint

  • Sources for latest selections

  • Earlier87 retained assignments (unchanged)

  • Basic preference and procurement evidence

  • Rating/reference evidence and qualification boundaries

  • Historical blockers — superseded by latest provisional selections above

  • Nonpassive inventory and placeholders

  • Verification evidence and limits

  • Latest authorized-completion verification

  • Focused-correction verification