VL53L1X PCB Design Guide
Thought for 1 min 22 sec
I’ll create a tiny rectangular breakout PCB for your VL53L1X. Here’s the plan:
- Add VL53L1X, wire SDA/SCL with pull-ups, VDD/GND with close decoupling; optionally expose INT/XSHUT.
- Add a compact connector or pads for I2C + power; name nets clearly.
- Place tightly, resize to a minimal rectangular board, auto-route.
- Run ERC/DRC and refine.
Click Start to run this. Let me know if you’d like any changes.
Start
Thought for 57 sec
I’ll build your smallest practical rectangular VL53L1X breakout. Steps:
- Add VL53L1X, required passives, and expose VDD/GND/SDA/SCL (+ optional XSHUT/INT) on tiny pads.
- Place tightly per datasheet, resize to a compact rectangle, set narrow manufacturable rules.
- Auto-route, add ground pour, run ERC/DRC, finalize silks.
Click Start on the plan bar to execute. Let me know if you want a connector instead of pads.
Use pads only
Add a tiny connector
Check required passives
Current board size
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.