Schematic Symbol for TP5410 Module: This project is a TP5410-based...

Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
A net identifier used to create connectivity to other Net Portal with the same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Power net portal is a special schematic object used to define a power or ground net. Power ports allow you to conveniently indicate a power net at any location in the design. Power nets of the same designator automatically connect throughout your design #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
14.2k
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k

+5V

VBAT

Capacitance

22u F

VBAT

GND

+5V

VBAT

Capacitance

22u F

GND

Capacitance

22u F

+5V

Capacitance

22u F

Distributor	Qty 1
	Digi-Key	$0.15–$0.69
	LCSC	$0.02–$0.60
	Mouser	$0.49–$0.64

how do I use Flux?

fernanpfj236

@copilot how do I use Flux?

5mo

copilot

Getting started with Flux is straightforward! Here are some steps to help you kick off your first project:

1. Create an Account

First, if you don’t have an account, you need to sign up. You can create an account by visiting Flux Signup. You can sign up using your email or link a Google account [1].

2. Exploring Tutorials and Resources

Flux offers a wealth of resources to help you get started:

YouTube Tutorials: Flux has a library of video tutorials to guide you through the various features and functionalities. Check these out to get hands-on learning [2].

Flux Documentation: Access comprehensive documentation for detailed guidance. If you run into any issues or have questions, joining the Flux Slack community is highly recommended. There you can ask questions directly to the Flux team and fellow users [3].

Intercom Live Chat: For more personal, real-time support, you can utilize the live chat feature on the Flux platform [4].

3. Designing Schematics and PCBs

Here’s a basic workflow to start designing your schematics and PCBs:

Adding Components:

Search for Components:
- Use the search bar to find components. Simply type in the component name or part number.

Place Components:
- Drag components from the library onto the canvas and drop them where you want them to be placed.

Connecting Components:

Wiring Components:
- Click on a pin of a component to start a wire, then click on another pin to complete the connection.
- For specific connections, the Copilot can assist you by providing specific pin-to-pin connection formats.

Simulation:

Run Simulations:
- To verify your design, you can use the built-in simulator. For detailed simulation tutorials, check out the simulation tutorial [5].

Positioning and Routing:

Positioning:
- Position your components logically before starting routing to minimize crossing wires.

Routing:
- Use the routing tools to create and manage connections between components efficiently [6].

4. Act on Schematic Suggestions

When using Copilot's suggestions for specific connections, you can make those connections directly by clicking the "Take Action" button [7].

5. Continuing Learning and Support

Keep exploring the resources and asking for help in the Slack community if needed to continuously improve your skills and knowledge.

By following these steps, you'll be well on your way to creating effective electronic designs using Flux. Happy designing!

[1] https://docs.flux.ai/Introduction/creating-an-account

[2] https://docs.flux.ai/Introduction/upverter-to-flux

[3] https://docs.flux.ai/Introduction/getting-support

[4] /p/blog

[5] https://docs.flux.ai/reference/how-the-simulator-works

[6] https://docs.flux.ai/reference/reference-positioning-routing

[7] https://docs.flux.ai/reference/copilot

5mo

explain this project.

fernanpfj236

@copilot explain this project.

5mo

copilot

Sure! This project is a Battery Management System (BMS) using the TP5410 IC. The circuit handles battery charging, voltage regulation, and protection, which is ideal for portable electronic devices. Here's a breakdown of the important components and their roles in the circuit:

TP5410 - Battery Charger IC

Designator: U1

Pins:
- VOUT: Output voltage
- ~CHRG: Charge status pin (active low)
- PROG: Programs the charge current
- ~STDBY: Standby status pin (active low)
- VCC: Input voltage
- BAT: Battery connection
- GND: Ground
- LX: Switching node
- EP: Exposed pad (usually connected to ground)

Capacitors

Designator: C1, C2, C3, C4, C5, C6, C7

Values:
- 22uF: C1, C2, C3, C6, C7
- 0.1uF: C4, C5

Resistors

Designator: R1, R3, R4, R5

Values:
- 1kΩ: R1, R4
- 0.3Ω: R3
- 680Ω: R5

Inductor

Designator: L1

Inductance: (value not specified)

Diode

Designator: D1

Part Number: SS34 (Schottky diode)

LEDs for Status Indication

Designators: CHRG and STDBY

Power Networks

+5V: Input power supply (assumed to be a regulated 5V source)

VIN: General input voltage

VBAT: Battery voltage

VCC: Power input for the TP5410

Connections

Using the provided nets, here are some key connections:

Power Supply:
- Connect VIN:P1 to U1:VCC.
- Connect +5V:P1 to U1:VCC.

Ground:
- Connect C5:P1 to GND.
- Connect U1:EP, C2:P1, C7:P1, C4:P1, C3:P1, C1:P1 to GND.

Battery Charging:
- Connect VBAT:P1 to U1:BAT.
- Connect C2:P2, C3:P2, C4:P2, C5:P2 to VBAT:P1.

Output Voltage:
- Connect U1:VOUT to D1:K.

Charge Status LEDs:
- Connect U1:~CHRG to CHRG:K.
- Connect U1:~STDBY to STDBY:K.

Summary

The TP5410 coordinates the charging process by stepping down input voltage to appropriately charge the connected battery while providing protection through internal circuitry. Capacitors and resistors assist with voltage regulation, smoothing, and setting operational parameters. Two LEDs provide charging (CHRG) and standby (STDBY) status, which are controlled via open-drain output pins on the TP5410.

Please let me know if you need any further details or clarifications!

5mo

explain this project.

fernanpfj236

@copilot explain this project.

5mo

copilot

This project revolves around a battery management system (BMS) utilizing the TP5410 integrated circuit. The TP5410 is specialized for battery charging, voltage regulation, and protection. Here's a breakdown of the design and the key components involved:

Overview

Purpose: A BMS that will effectively charge and manage a battery, ensuring safe operation.

Main IC: The TP5410 handles the primary functions including charging, voltage regulation, and protection.

Components: Power Nets:

+5V: This is the input power supply for charging.

VIN: The direct power input.

VBAT: The battery voltage.

Capacitors:

C1, C2, C3, C6, C7: 22uF each for decoupling and stability.

C4, C5: 0.1uF each for filtering.

Resistors:

R1: 1kΩ for setting current limits and/or feedback.

R3: 0.3Ω for current sensing.

R4: 1kΩ likely for LED current limiting.

R5: 0.68kΩ for programming or feedback functions.

Diode:

D1: Schottky diode (SS34) for protection or rectification.

LEDs:

CHRG: Indicates charging status.

STDBY: Indicates standby status.

Inductor:

L1: Part of the power conversion stage (Boost or Buck converter).

Connections with TP5410:

U1:VOUT: Voltage Output.

U1:$\sim$CHRG: Charge status output, typically connected to an LED (CHRG).

U1:PROG: Program input, often connected to a resistor (R5) to set the charging current.

U1:$\sim$STDBY: Standby status output, connected to an LED (STDBY).

U1:VCC: Power supply input.

U1:BAT: Battery voltage input/output.

U1:GND: Ground connection.

U1:LX: Switch pin for connecting to the inductor (L1).

Project Nets:

GND: Common ground.

Net (VIN - P1): Connects VIN components, such as the input resistor (R3).

Net (BAT+): Connects battery-related components (C4, U1:BAT, etc.).

Net (VOUT, LX, PROG, etc.): Other specific signal and control nets.

DRM Properties:

License: https://creativecommons.org/licenses/by/4.0/.

Example Connections:

5V Supply Connection:
- Connect +5V:P1 to VCC:P1 and U1:VCC.

Ground Connections:
- Connect GND to U1:GND, U1:EP, and all capacitor ground pins (C2:P2, C7:P2, etc.).

This summary provides an overview of the various components and their intended connections for a TP5410-based BMS project. If you need more specific details on any part, let me know!

5mo

Does it have battery protection ? And what is the max output current delivered ?

paulgiral

@copilotDoes it have battery protection ? And what is the max output current delivered ?

5mo

copilot

The TP5410 IC does have battery protection features, and it is designed to handle various battery management tasks. The battery protection features include:

Overcharge Protection: Prevents the battery from charging beyond its safe limit.

Overdischarge Protection: Prevents the battery from discharging below its safe limit.

Overcurrent Protection: Prevents damage from excessive current.

Short Circuit Protection: Protects the battery and circuit from short circuits.

The maximum output current that the TP5410 can deliver depends on its configuration and external components. According to its datasheet, the maximum charge current can be set up to 1.2A through the programming resistor $R_5$ in this case.

To summarize:

Battery Protection: Yes
- Overcharge Protection
- Overdischarge Protection
- Overcurrent Protection
- Short Circuit Protection

Maximum Output Current: Up to 1.2A (programmable with an external resistor)

If you need detailed calculations or further adjustments, please let me know!

5mo

paulgiral

what resistor to put for 1.2 A?

5mo

copilot

To set the charge current for the TP5410, you need to use a resistor at the PROG pin. The charge current can be calculated using the following formula from the TP5410 datasheet:

I_{CHG} = \frac{1200V}{R_{PROG}}

where:

$I_{CHG}$ is the charge current in mA

$R_{PROG}$ is the programming resistor in ohms (Ω)

Given that you want to set the charge current to 1.2A (or 1200mA), you can rearrange the formula to solve for $R_{PROG}$:

R_{PROG} = \frac{1200V}{I_{CHG}}

Plugging in the desired charge current of 1200mA:

R_{PROG} = \frac{1200V}{1200mA} = 1\ \text{kΩ}

So, to set a 1.2A charge current, you would need a 1kΩ resistor on the PROG pin.

Here’s the specific connection for your schematic:

Connect R5:P1 to U1:PROG.

Just ensure that the resistor value is accurate and has a low tolerance to achieve precise current settings.

5mo

Does it have battery protection ? And what is the max output current delivered ?

paulgiral

Does it have battery protection ? And what is the max output current delivered ?

5mo

@copilot i need a infrared smd receiver component for my project

slegaris

@copilot i need a infrared smd receiver component for my project

9mo

copilot

For incorporating an infrared (IR) SMD receiver into your project, there are several options available that are widely used in various electronic devices for remote control reception. One commonly used part is the TSOP series from Vishay, which includes models like TSOP382.., TSOP384.., etc., offering different carrier frequencies (e.g., 38kHz, 36kHz, 40kHz, etc.) to match the transmission frequency of your IR transmitter.

Here are some of the key considerations and recommendations for selecting an IR SMD receiver:

Carrier Frequency: Ensure the receiver matches the frequency of your IR transmitter. The TSOP38238, for instance, is designed for a 38kHz IR signal.

Package Type: Since you're looking for an SMD option, verify the package size and type to ensure it fits your PCB layout. The TSOP series typically comes in small, surface-mountable packages.

Supply Voltage: Check the receiver's supply voltage requirements to ensure compatibility with your circuit. Many IR receivers, like the TSOP series, operate within a 2.5V to 5.5V range, making them suitable for various applications.

Output Type: Most IR receivers have a digital output that goes low when IR pulses at the carrier frequency are detected. Ensure this output logic is compatible with your project's requirements.

Ambient Light Filtering: A good IR receiver will have robust ambient light filtering to avoid false triggering by sunlight or other IR sources. The TSOP series is known for good ambient light rejection.

For example, you could select the TSOP38238 for your project, considering its popularity and general applicability. The connections for incorporating the TSOP38238 into your project might look something like this:

Connect the Vout (Output) of the TSOP38238 to the input pin of your microcontroller or circuit that will process the IR signal.

Connect the Vcc of TSOP38238 to a +3.3V or +5V supply, depending on your circuit requirements.

Connect the GND of the TSOP38238 to the ground of your circuit.

It is important to note that while I have recommended a popular choice in the Vishay TSOP series, there are numerous IR receivers available from various manufacturers that could also fit your project's specific needs. Always consult the datasheet of the component you select to ensure it meets your application's requirements in terms of voltage, frequency, power consumption, and size.

9mo

Someone is typing...

	Designator	Ruleset
	-	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	-	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	-	Remove VALUEs
	-	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊
	Silk Shapes	Override rule for Silk Shapes
	＊`REF`＊	Override rule for ＊`REF`＊
	＊`REF`＊	Override rule for ＊`REF`＊

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

To use this component and get started with Flux sign up now.

vasy_skral / TP5410 Module

Schematic

... show more