TE Connector Verification

Thought for 16 mins 8 sec
Thought for 21 sec
Reading TE Connector Seating Correction's report…
Thought for 10 sec
Reading "mechanical-seating-correction-and-verifi..." project doc.
Thought for 7 sec
4/4 Independently verify tail protrusion, locator alignment, housing/PCB clearances, and required board geometry

Determine the true PCB seating plane and mounting arrangement from rev-C drawing, DXF, and STEP section geometry

Inspect the current footprint and 3D transformation against the true seating datum

Correct the model transform, footprint representation, and metadata for the real mounting arrangement

Independently verify tail protrusion, locator alignment, housing/PCB clearances, and required board geometry

Thought for 19 sec
Created a thread
Sensor Housing Verification
Completed
View Thread
Thought for 5 sec
Awaiting 1 background task
Received notification from "Sensor Housing Verification" that it finished — picking the work back up.

flux

The independent final verifier has finished. I’m reconciling its direct read-back against the corrected transform and release conditions now, then I’ll provide the final mechanical-use verdict.

flux

Corrected the critical Z-axis defect. This is an enclosure-integrated 3-in-1 sensor housing, not a conventional standalone header: the PCB nests inside the housing at an internal seating plane.
  • Model transform corrected; all five tails now pass through the PCB plane.
  • Tail protrusion is 2.725 mm through a 1.50 mm PCB.
  • Locator protrusion is 1.628 mm, with ≥0.15 mm diametral NPTH clearance.
  • False full-body courtyard/keepout removed.
  • Project name, description, and mounting metadata corrected.
Status: electrically usable and mechanically representative, but not production-release safe until the custom nested PCB perimeter/cutouts are defined using Rev-C CAD or approved integration geometry. The supplied STEP/DXF are Rev B. Full evidence: Mechanical Seating Correction and Verification.
Define nested PCB
Find Rev-C CAD
Add placement warning
Export corrected part
Sign up to send

Files

Pins

Symbol

Layout

3D View

Part Completion Report
Scope status

Table

Required itemStatusEvidence
1. Symbol terminals and six-hole footprintCompletedFive passive terminals 1–5; five bound PTH pads and one unbound NPTH locator; locked coordinates/drills preserved.
2. Assembly, courtyard, and top silkCompletedExact projected-envelope rectangles added on Top Assembly and Top Courtyard; pin-1 marker and negative-Y mating arrow/label added on Top Silkscreen.
3. Durable official STEP and transformCompletedOfficial STEP uploaded as a project 3D asset and attached to a Model node under the Footprint with the specified axis convention, translations, unit scale, and no negative scale.
4. Read-back and checksCompletedSchematic, scene tree, asset metadata, and 2D silk geometry read back; selected part/DRC checks return no findings after remediation.
5. Publish reusable partCompletedProject reports Published as part: yes; library lookup returns the part UID and terminal count.
Symbol read-back
Exactly 5 terminals exist:

Table

Terminal name/designatorPin numberPin typeTerminal orderPin groupSection
11Passive1ContactsA
22Passive2ContactsA
33Passive3ContactsA
44Passive4ContactsA
55Passive5ContactsA
There are no schematic nets. The initial part-review informational finding for missing Pin Group/Section was corrected on all five terminals.
Pad and hole read-back
All coordinates are relative to the locked pin-3 footprint origin (0,0) in PCB/top seating view.

Table

FeatureCenter (mm)Copper size (mm)Drill (mm)Type / platingTerminal bindingShape
pad1(-8, 0)2.50 × 2.501.50STD plated through-hole, annular copper Top/Bottom1Rounded rectangle, corner radius 0.50 mm
pad2(-4, 0)2.50 × 2.501.50STD plated through-hole, annular copper Top/Bottom2Circular
pad3(0, 0)2.50 × 2.501.50STD plated through-hole, annular copper Top/Bottom3Circular
pad4(4, 0)2.50 × 2.501.50STD plated through-hole, annular copper Top/Bottom4Circular
pad5(8, 0)2.50 × 2.501.50STD plated through-hole, annular copper Top/Bottom5Circular
locator(0, -18.79754)2.10 × 2.102.10HOLE / NPTH, no electrical copper bindingUnboundCircular
  • Adjacent signal-pin pitch read back as exactly 4.00 mm.
  • PTH copper diameter 2.50 mm versus 4.00 mm pitch leaves 1.50 mm edge-to-edge copper spacing, so the five PTH pads do not overlap.
  • Locator center is 18.79754 mm from the pin row and does not overlap it.
  • Exactly six hole-bearing pad nodes exist: five STD PTH and one HOLE NPTH.
Assembly and courtyard read-back
Top assembly/body envelope
  • Layer: Top Assembly
  • Stroke: 0.15 mm solid
  • Rectangle center: (0, -4.7536495) mm
  • Local corners: (-21.363012, -33.5061095) to (21.363012, 33.5061095) mm
  • Resulting world extents: x [-21.363012, +21.363012] mm; y [-38.259759, +28.752460] mm
Top courtyard
  • Layer: Top Courtyard
  • Stroke: 0.05 mm solid
  • Rectangle center: (0, -4.7536495) mm
  • Local corners: (-21.863012, -34.0061095) to (21.863012, 34.0061095) mm
  • Resulting world extents: x [-21.863012, +21.863012] mm; y [-38.759759, +29.252460] mm
No copper body geometry was added.
Top-silkscreen features
  • Pin-1 marker: 1.00 mm diameter stroked circle centered at (-8, +2.5) mm, 0.20 mm stroke. Its nearest silk extent is y = 2.0 mm; the pin-1 solder-mask edge is y = 1.35 mm (1.25 mm copper radius plus 0.10 mm expansion), leaving 0.65 mm clearance.
  • Mating label: MATE, 1.20 mm text, centered at (14, -1.5) mm.
  • Direction arrow: shaft from (14, -3) to (14, -8) mm with arrowhead endpoints (12.8, -6.5) and (15.2, -6.5) mm; 0.25 mm stroke. It points toward negative footprint Y, corresponding to negative source STEP Z under the locked transform.
  • The arrow/label is beyond the signal-pad row’s rightmost copper/mask envelope and clear of the locator hole.
Official 3D model read-back
  • Asset name: TE_2347000-1_official.stp
  • Asset label: TE Connectivity 2347000-1 Official STEP
  • Asset type/status: stp, is3dModel=true
  • Durable asset:

    3D Model

  • Model node name: TE 2347000-1 Official 3D Model
  • Model node UID: 760d7bd0-6f5c-48cb-b81b-eebdde17e2cd
  • Parent: Footprint 93650c95-3ca2-4daf-a8d0-0e6fc0a00446.defaultFootprint
  • Resolved storage name: document_assets/TE_2347000-1_official-9cdce632-ab0d-424c-824a-bc9b0b864a29.stp
  • Resolved renderer target: asset-pipeline GLB URL present
Complete node transform
  • Position: (x, y, z) = (0, +28.75246, -1.275) mm
  • Rotation: (0°, 0°, 0°)
  • Scale: (1, 1, 1)
  • zIsUp: false (source is interpreted with its Y/Z axes exchanged)
  • Physical materials: true
  • Show edges: true
This implements the locked mapping:
  • Xfp = STEP_X
  • Yfp = STEP_Z + 28.75246
  • Zfp = STEP_Y - 1.275
Alignment and mirror evidence
  • The model is a descendant of the footprint, so its transformed datum moves with the reusable part.
  • The specified translations place source STEP_Z = -28.75246 on footprint Y = 0 and source STEP_Y = +1.275 on footprint seating plane Z = 0.
  • Therefore the model’s tail row datum maps onto the locked pin row at y = 0 and the seating plane maps to footprint z = 0; the locked source locator maps to (0, -18.79754) by the same transform.
  • STEP_X is retained directly, so pins 1→5 remain left-to-right at x = -8, -4, 0, +4, +8 mm.
  • No axis has a negative scale, scale is exactly unity, and rotation is zero. zIsUp=false selects the source-axis convention rather than applying a geometric negative-scale mirror. Thus the attached node has no explicit mirroring operation.
  • Negative source STEP Z maps to negative footprint Y, matching the added outward mating-direction arrow.
Verification checks
Read-back sources used:
  1. Full schematic inspection after remediation.
  2. PCB scene-tree inspection of all pads, assembly/courtyard, silk, and model node.
  3. 2D SVG read-back of the mating arrow and label geometry.
  4. Full asset metadata read-back confirming durable STEP presence and GLB conversion.
  5. Project metadata and library lookup.
Checks run:
  • Part review: MPN, manufacturer, datasheet, terminal definition, part type, project metadata, terminal pin number, terminal parametric properties, missing properties, excluded terminals.
  • Layout/DRC: overlapping copper, invalid layer, component body overlap, pad access clearance.
Final check result: no returned findings. The earlier five informational terminal-parametric findings were removed by setting Pin Group and Section.
Publication
  • Published state: Published as part: yes
  • Published Part UID: 93650c95-3ca2-4daf-a8d0-0e6fc0a00446
  • Active published part project: 2347000-1
  • Library result: Flux part search
  • Library read-back: name 2347000-1, manufacturer TE Connectivity, mount Through Hole, terminal count 5, datasheet present.

  • Scope status

  • Symbol read-back

  • Pad and hole read-back

  • Assembly and courtyard read-back

  • Top assembly/body envelope

  • Top courtyard

  • Top-silkscreen features

  • Official 3D model read-back

  • Complete node transform

  • Alignment and mirror evidence

  • Verification checks

  • Publication