ATSAMA5D27 Part Audit

Thought for 13 mins 31 sec

Thought for 3 mins 16 sec

Created 4 tasks.

1/4 Inspect all available part metadata, symbol pins, and footprint details

Thought for 5 sec

Referenced guidance.

Thought for 7 sec — Inspecting for details

Reading schematic details.

Thought for 20 sec — Considering project details

Search project.

Getting a layout overview.

Thought for 1 min 11 sec — Searching project components

Reading "part number, manufacturer, package, pin count, description, product URL, datasheet details" in reference.

Thought for 28 sec — Searching for metadata dimensions

Thought for 3 sec

Thought for 2 sec

Reading "ATSAMA5D27-WLSOM1 package dimensions, pad layout, pitch, terminal count, 3D model or mechanical dimensions" in reference.

Thought for 5 sec

Thought for 13 sec

Read reference.

Thought for 7 sec — Identifying project parts

Read reference.

Thought for 3 sec

Thought for 3 sec — Evaluating project properties

Reading layout details.

Thought for 6 sec — Clarifying module specifications

Thought for 4 sec — Searching for datasheets

Thought for 1 sec — Refining the description

Found 10 results for site:microchip.com ATSAMA5D27-WLSOM1 datasheet PDF.

Found 10 results for Microchip ATSAMA5D27-WLSOM1 module datasheet 210 pads.

Found 10 results for ATSAMA5D27-WLSOM1-FS package dimensions land pattern.

Thought for 11 sec — Investigating pin assignments

Created a thread

ATSAMA5D27 Audit

Completed

View Thread

Thought for 7 sec

2/4 Find and attach the official datasheet URL if missing

Inspect all available part metadata, symbol pins, and footprint details

Find and attach the official datasheet URL if missing

Cross-check symbol, footprint, and pin descriptions against the datasheet

Summarize key specifications and mismatches

Thought for 7 sec

Awaiting 1 background task

Received notification from "ATSAMA5D27 Audit" that it finished — picking the work back up.

Thought for 23 sec

flux

I’ve reconciled the executor’s report: the requested audit is complete, and I’m doing a final read-back of the documented findings before closing.

Thought for 58 sec

flux

Audit complete. Full findings are in Part Audit.

188 official pins are correctly mapped by number and function; 56 names have suffix/case formatting differences.
The extra 22 EP terminals (189–210) are valid central ground-copper geometry but are incorrectly modeled as numbered electrical pins.
All terminals lack pin descriptions and use Pin Type = Unspecified.
Mount = Wire is incorrect; this is an SMD/castellated module. Part Type is unset.
The footprint’s 188 perimeter pads, 0.8 mm pitch, and primary land geometry match the datasheet.
The stored Datasheet URL points to the wrong SAMA5D2 SiP datasheet. It was not changed because the requested condition was to update it only if absent.
The 3D model could not be fully validated because its referenced asset was unavailable.

Correct part metadata

Fix central ground pads

Improve footprint completeness

Restore and verify 3D

Files

Pins

Symbol

Layout

3D View

ATSAMA5D27-WLSOM1