Editing Footprint Inquiry
Thought for 15 sec
Below is a suggestion to add two instances of the updated mounting hole footprint to your schematic:
- Part: Updated mounting hole pad (with a 6 mm hole and a 16 mm copper outer diameter)
- Designators:
- J1: New instance of the updated pad
- J2: New instance of the updated pad
You can use the Apply changes option to add these components into your schematic.
make a circular pad, 18mm OD, 6mm ID. ,through hole plated, with ample solder filled vias for mechanical strength and conductivity.
Thought for 30 sec
Below is a suggestion to create a new mounting pad footprint with the following specifications:
- Shape: Circular
- Copper Outer Diameter: 18 mm
- Inner Drill (Hole) Diameter: 6 mm
- Plating: Through-hole plated
- Reinforcement: Include ample solder-filled vias to enhance mechanical strength and conductivity
You can use the Apply changes option to add this new custom mounting pad footprint into your project.
Add four vias
Insert array vias
Optimize via placement
Check via clearance
No schematic yet
Talk to Flux to get started.
