Editing Footprint Inquiry

Thought for 13 sec

Below is a suggestion to add two instances of the updated part to your design as J1 and J2:

Part: The updated pad footprint (with a 6 mm hole and a 16 mm outer copper diameter)
Designators:
- J1: New instance of the updated pad
- J2: New instance of the updated pad

You can use the Apply changes option to add these new parts into your project.

Proceed with adding the updated part as J1 and J2 to my schematic.

Thought for 15 sec

Below is a suggestion to add two instances of the updated mounting hole footprint to your schematic:

Part: Updated mounting hole pad (with a 6 mm hole and a 16 mm copper outer diameter)
Designators:
- J1: New instance of the updated pad
- J2: New instance of the updated pad

You can use the Apply changes option to add these components into your schematic.

make a circular pad, 18mm OD, 6mm ID. ,through hole plated, with ample solder filled vias for mechanical strength and conductivity.

Thought for 30 sec

Below is a suggestion to create a new mounting pad footprint with the following specifications:

Shape: Circular
Copper Outer Diameter: 18 mm
Inner Drill (Hole) Diameter: 6 mm
Plating: Through-hole plated
Reinforcement: Include ample solder-filled vias to enhance mechanical strength and conductivity

You can use the Apply changes option to add this new custom mounting pad footprint into your project.

Add four vias

Insert array vias

Optimize via placement

Check via clearance

Files

Pins

Symbol

Layout

3D View

Talk to Flux to get started.

Name

M4 Mounting Hole