# Arduino Uno/Bluno Shield Template (Component) ## Description Template for a shield connected to an Arduino Uno/Bluno. Note, the pin out for this was designed specifically for a Bluno, but it should be pin compatible with an Arduino Uno ## Component Details - **Owner:** tpetrovic2 - **Created:** 8/19/2022 - **Last Updated:** 8/25/2022 - **Visibility:** Public - **Used in:** 269 projects - **Stars:** 3 - **Forks:** 1 - **Package / Case Code:** TO - **Pin Count:** 32 ## Pins | Pin | Name | Type | |-----|------|------| | - | 3.3V | | | - | 5V | | | - | A0 | | | - | A1 | | | - | A2 | | | - | A3 | | | - | A4/SDA | | | - | A4/SDA | | | - | A5/SCL | | | - | A5/SCL | | | - | AREF | | | - | D0/RX | | | - | D1/TX | | | - | D10 | | | - | D11/MOSI | | | - | D12/MISO | | | - | D13/SCK | | | - | D2 | | | - | D3 | | | - | D4 | | | - | D5 | | | - | D6 | | | - | D7 | | | - | D8 | | | - | D9 | | | - | GND | | | - | GND | | | - | GND | | | - | IOREF | | | - | NC | | | - | RESET | | | - | Vin | | --- *Generated from [https://www.flux.ai/tpetrovic2/arduino-unobluno-shield-template~vt](https://www.flux.ai/tpetrovic2/arduino-unobluno-shield-template~vt)*