# Positive Clamper Circuit ## Description These positive clamper circuits shift the output signal to the positive portion of the input signal. ## Project Details - **Owner:** thomasjohnson - **Created:** 12/9/2021 - **Last Updated:** 12/14/2021 - **Visibility:** Public ## Key Components ### D1 — [PN Junction Diode](https://www.flux.ai/jharwinbarrozo/pn-junction-diode~z7.md) - Emission Coefficient: 2.00 - Saturation Current: 1.88e-9A - Breakdown Voltage: 50V - Series Resistance: 0.0286Ω **Pins:** - ANODE - CATHODE ### D2 — [PN Junction Diode](https://www.flux.ai/jharwinbarrozo/pn-junction-diode~z7.md) - Series Resistance: 0.0286Ω - Saturation Current: 1.88e-9A - Breakdown Voltage: 50V - Emission Coefficient: 2.00 **Pins:** - ANODE - CATHODE ### V1 — [Waveform Generator](https://www.flux.ai/jharwinbarrozo/waveform-generator~ggu.md) - Part Type: Power Source - Duty Cycle: 50% - Phase Offset: 0° - Peak Voltage: 5V - DC Offset: 0V - Frequency: 8kHz **Pins:** - P1 - P2 ### Vi — [Waveform Generator](https://www.flux.ai/jharwinbarrozo/waveform-generator~ggu.md) - Duty Cycle: 50% - Part Type: Power Source - Phase Offset: 0° - Frequency: 8kHz - Peak Voltage: 5V - DC Offset: 0V **Pins:** - P1 - P2 *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/thomasjohnson/positive-clamper-circuit~xn](https://www.flux.ai/thomasjohnson/positive-clamper-circuit~xn).* --- *Generated from [https://www.flux.ai/thomasjohnson/positive-clamper-circuit~xn](https://www.flux.ai/thomasjohnson/positive-clamper-circuit~xn)*