# 7-Segment PCB 3F6C ## Description This is a simulation of a 7-segment counter using digital logic gates (and, or, not). Three pulsed sources are required at A,B,C and should count out the binary 000-111. This is manufacturable and has a PCB design for it! ## Project Details - **Owner:** theridion - **Created:** 7/18/2024 - **Last Updated:** 7/18/2024 - **Visibility:** Public ## Key Components ### — Generic Resistor No Silkscreen - Resistance: 500Ω - Part Type: Resistor - Package: SMD_0603_1608Metric **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Resistance: 500Ω - Package: SMD_0603_1608Metric - Part Type: Resistor **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Package: SMD_0603_1608Metric - Part Type: Resistor - Resistance: 500Ω **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Package: SMD_0603_1608Metric - Part Type: Resistor - Resistance: 500Ω **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Package: SMD_0603_1608Metric - Part Type: Resistor - Resistance: 500Ω **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Resistance: 500Ω - Package: SMD_0603_1608Metric - Part Type: Resistor **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Resistance: 500Ω - Package: SMD_0603_1608Metric - Part Type: Resistor **Pins:** - P1 [pin 1] - P2 [pin 2] ### — Generic Resistor No Silkscreen - Part Type: Resistor - Package: SMD_0603_1608Metric - Resistance: 500Ω **Pins:** - P1 [pin 1] - P2 [pin 2] ### AND1 — [74HC08D,653](https://www.flux.ai/jlamflux/74hc08dc653~pj.md) - Manufacturer Part Number: 74HC08D,653 - Datasheet URL: https://www.mouser.co.za/datasheet/2/916/74HC_HCT08-2937369.pdf - Part Type: Integrated Circuit **Pins:** - 1A [pin 1] - 1B [pin 2] - 1Y [pin 3] - 2A [pin 4] - 2B [pin 5] - 2Y [pin 6] - 3A [pin 9] - 3B [pin 10] - 3Y [pin 8] - 4A [pin 12] - 4B [pin 13] - 4Y [pin 11] - GND [pin 7] - VCC [pin 14] ### VA — Pulsed Voltage Source - Delay: 0.4s - Rise Time: 1e-8s - Fall Time: 1e-8s - Pulse Width: 0.4s - Part Type: Power Source - Initial Voltage: 0V - Pulsed Voltage: 5V - Period: 0.8s **Pins:** - Anode - Cathode ### VB — Pulsed Voltage Source - Period: 0.4s - Pulsed Voltage: 5V - Initial Voltage: 0V - Part Type: Power Source - Fall Time: 1e-8s - Pulse Width: 0.2s - Rise Time: 1e-8s - Delay: 0.2s **Pins:** - Anode - Cathode ### VC — Pulsed Voltage Source - Delay: 0.1s - Pulse Width: 0.1s - Rise Time: 1e-8s - Fall Time: 1e-8s - Part Type: Power Source - Pulsed Voltage: 5V - Initial Voltage: 0V - Period: 0.2s **Pins:** - Anode - Cathode ### Vcc — [DC Supply](https://www.flux.ai/jharwinbarrozo/dc-supply~35.md) - Voltage: 4.9V **Pins:** - ANODE - CATHODE *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/theridion/7-segment-pcb-3f6c~kd](https://www.flux.ai/theridion/7-segment-pcb-3f6c~kd).* --- *Generated from [https://www.flux.ai/theridion/7-segment-pcb-3f6c~kd](https://www.flux.ai/theridion/7-segment-pcb-3f6c~kd)*