Molex Part Verification

D

dkgifford

flux

Verify Molex 43045-0427 part against official SD-43045-010: https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/430/43045/430450427_sd.pdf. Edit only this part project if permitted. Check exact MPN/manufacturer URL, 4-circuit 3.00 mm dual-row vertical THT footprint, hole sizes, component-side pin numbering/circuit-1 orientation, keying/polarization pegs, retention and model. Run/read back checks; report exact verification or blocker.

flux

I’ll compare the part’s metadata, symbol/footprint geometry, pin orientation, retention features, and 3D model against the official Molex drawing, then run read-back checks. I’ll edit only if project permissions allow; otherwise I’ll report the exact blocker and discrepancies.

flux

Verification completed against Molex drawing SD-43045-010, Rev. G3.
Verified correct
  • Footprint: 4 circuits, dual-row, vertical THT, 3.00 mm × 3.00 mm terminal pitch.
  • Terminal holes: Ø1.02 mm; footprint uses Ø1.02 mm drills.
  • Two NPTH polarization holes: Ø1.02 mm, 9.00 mm apart, offset 0.94 mm from the adjacent terminal row.
  • Pin pattern and pin-1 marker are consistent with the component-side footprint orientation.
  • 3D STEP model is present at 1:1 scale with no obvious metadata-scale issue.
Issues found
  • Stored MPN is 430450427; canonical Molex MPN should be 43045-0427.
  • Manufacturer is missing.
  • Datasheet/manufacturer URL is missing.
  • Part Type is missing.
  • Terminal Pin Number properties are missing for pins 1–4.
  • Pad copper diameter is overridden to 2.00 mm, rather than the imported footprint’s 1.52 mm; the Ø1.02 mm drill remains correct.
  • The drawing permits assemblies with either one or two polarization pegs, while this footprint provides both holes.
  • Exact 3D body dimensions/alignment could not be conclusively measured from the model read-back.
Blocker: this project is owned by tecnico01, and your access is view-only, so I could not edit the part. No project changes were made.
Request owner fix metadata
Inspect 3D alignment
Generate correction checklist
Compare alternate peg options
Sign up to send

Files

Pins

Symbol

Layout

3D View

1
4
3
2
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Terminal Type
1
Unspecified
unspecified
2
Unspecified
unspecified
3
Unspecified
unspecified
4
Unspecified
unspecified

430450427